Hiya folks

I am after some advise please?  I am looking to change the rear brake 
cylinders on Q2-002 as I have a very minor weep issue, I have read both the 
build manuals, and both state that these are not standard Fiesta parts.  
The late build manual says 'change the rear wheel cylinders to the correct 
size, new ones are supplied in the kit', and the original build manual says 
'17.5mm for Vented Front discs, and 15mm for solid front discs, this is not 
the same on any other Fiesta'... 

Does anyone know of the correct parts please, and also are Ferrodo still 
the brake shoe brand of choice, or is there anything more suitable?  Also I 
may change the front discs / pads as I am not going anywhere fast (pun 
intended!), is there anything to look out for on these in terms of brand 
etc?

Finally - the fan control switch has failed, I have a new one to fit, but 
no amount of socket work will shift it, and I am heading for causing damage 
- any recommendations for where and how to fit an new switch to the cooling 
system, or should i just fit a manual switch on the dashboard?

Hope you are all keeping safe, and best regards

James T
Q2-002
www.bostin.photography

 

-- 
-- 
You received this message because you are subscribed to the Google Groups 
"Quantum Owners Group" group.
To post to this group, send email to quantumowners@googlegroups.com
To unsubscribe from this group, send email to 
quantumowners-unsubscr...@googlegroups.com
For more options, visit this group at 
http://groups.google.com/group/quantumowners?hl=en

IMPORTANT NOTE: All information presented herewith is provided on an "As Is" 
basis, without warranty or the implication thereof. Neither the Quantum Owners 
Club nor the individuals associated with the Quantum Owners Club or in the 
preparation of the above information shall have any liability to any person or 
entity with respect to liability, loss, or damage caused or alleged to be 
caused directly or indirectly by the instructions contained within this or 
related message(s).
--- 
You received this message because you are subscribed to the Google Groups 
"Quantum Owners Group" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to quantumowners+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/quantumowners/0b8c7d45-c09b-48f7-b155-97120899008a%40googlegroups.com.

Reply via email to