tl;dr - kernel-4.8.7-11 +1 from me! On Thu, Oct 13, 2016 at 1:20 AM, Jean-Philippe Ouellet <j...@vt.edu> wrote: > The laptop fails to resume about once a day and requires a > hold-the-power-button reset > I'm hoping that newer kernels fix this (dom0 currently on 4.4.14-11),
Since last Friday (~3 days) I've been on kernel-4.8.7-11 from qubes-dom0-testing with only a single full-fan hang while attempting to resume (not the usual failure mode, and *much* less frequent), as opposed to the several-per-day just-dead hangs I was consistently experiencing before, so... progress! :) Wireless[1] now sometimes fails to come back after resume with this in the dmesg: Freezing user space processes ... (elapsed 0.001 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. PM: freeze of devices complete after 0.090 msecs suspending xenstore... PM: late freeze of devices complete after 0.053 msecs PM: noirq freeze of devices complete after 21.827 msecs xen:grant_table: Grant tables using version 1 layout PM: noirq thaw of devices complete after 0.648 msecs PM: early thaw of devices complete after 0.089 msecs PM: thaw of devices complete after 0.453 msecs Restarting tasks ... done. IPv6: ADDRCONF(NETDEV_UP): wlp0s0: link is not ready iwlwifi 0000:00:00.0: L1 Enabled - LTR Enabled iwlwifi 0000:00:00.0: L1 Enabled - LTR Enabled iwlwifi 0000:00:00.0: Failed to load firmware chunk! iwlwifi 0000:00:00.0: Could not load the [0] uCode section iwlwifi 0000:00:00.0: Failed to start INIT ucode: -110 iwlwifi 0000:00:00.0: Failed to run INIT ucode: -110 iwlwifi 0000:00:00.0: L1 Enabled - LTR Enabled iwlwifi 0000:00:00.0: L1 Enabled - LTR Enabled iwlwifi 0000:00:00.0: Failed to load firmware chunk! iwlwifi 0000:00:00.0: Could not load the [0] uCode section iwlwifi 0000:00:00.0: Failed to start INIT ucode: -110 iwlwifi 0000:00:00.0: Failed to run INIT ucode: -110 .... Rebooting sys-net (so far) reliably makes it work again (and man... I really wish there were some way to restart it without shutting everything else down first - it'd be awesome if sys-firewall would gracefully re-establish whatever it needs. idk what that would be exactly, or what the challenges are - i haven't looked under the hood of qubes networking yet). Curiously, the wireless didn't hang while i had the 4.4 kernel in dom0, and now it hangs with 4.8 in dom0 and either 4.4 OR 4.8 in sys-net. This does not make sense to me, but it is indeed what I have observed. Perhaps it was also failing before and I just never noticed because the whole machine would hang so often. [1]: lspci => 00:00.0 Network controller: Intel Corporation Wireless 8260 (rev 3a) -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/CABQWM_Avb0g5uBGHXzgwJ70PMNj0FM_oB9Ut4m%2BZZVNVAPyEJQ%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.