Hello Qubes World.
I have spent the better part of 5-6 hours trying to figure out why my wifi
will not show up in sys-net, it has never worked. I have read through every
forum/post I could find and wasn't able to figure out the exact issue. I feel
as if this is my last resort, I have to travel in a few weeks and if I can't
get it working I'll have to abandon my 3 week qubes exerience. I'll provide as
much information as possible to aid in troubleshooting. Appreciate any help
given, thanks.
Laptop: Acer Aspire E 15 E5-575G-76YK
When I first start sys-net I typically have to kill it a couple times
before it will even recognize my ethernet..what a pain. As for the Wifi I run
dmesg and dont see any errors regarding that the device has failed....but i'm
not really sure what to look for... I will post the output below ...can't
figure out how to make a link to it yet so sorry for the expanded output.
I've attempted to manually add the Wifi SSID and crap through the Network
Manager and that didn't work either. It appears that it just isn't loading when
sys-net starts up even though I've added the device in the devices tab. A lot
of the ubuntu forums say to install "linux-headers-generic" and
"build-essential" but those aren't listed in the repo
The output of lspci shows the wireless adapter but one thing that I noticed is
that it doesn't say "Kernel driver in use" like the others say (part of the
problem?)
00:00.0 Network controller [0280]: Qualcomm Atheros QCA9377 802.11ac Wireless
Network Adapter [168c:0042] (rev 30)
Subsystem: Lite-On Communications Inc Device [11ad:0806]
Kernel modules: ath10k_pci
The drivers are installed as listed in /lib/firmware/ath10k/QCA9377/hw1.0
sudo modprobe -D ath10k_pci
insmod /lib/modules/4.4.31-11.pvops.qubes.x86_64/kernel/net/rfkill/rfkill.ko
insmod /lib/modules/
4.4.31-11.pvops.qubes.x86_64/kernel/net/wireless/cfg80211.ko
insmod
/lib/modules/4.4.31-11.pvops.qubes.x86_64/kernel/net/mac80211/mac80211.ko
insmod/lib/modules/4.4.31-11.pvops.qubes.x86_64/kernel/drivers/net/wireless/ath/ath.ko
insmod
/lib/modules/4.4.31-11.pvops.qubes.x86_64/kernel/drivers/net/wireless/ath/ath10k/ath10k_core.ko
insmod
/lib/modules/4.4.31-11.pvops.qubes.x86_64/kernel/drivers/net/wireless/ath/ath10k/ath10k_pci.ko
Current linux firmware is 20160923-68.git42ad5367.fc24.noarch
When I run the command "nmcli g" it shows the wifi enabled and wwan enabled.
STATE CONNECTIVITY WIFI-HW WIFI WWAN-HW WWAN
connected full enabled enabled enabled enabled
ifconfig output:
enp0s1f1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.1.60 netmask 255.255.255.0 broadcast 192.168.1.255
inet6 fe80::b353:2725:5528:1f78 prefixlen 64 scopeid 0x20<link>
ether 54:ab:3a:81:38:24 txqueuelen 1000 (Ethernet)
RX packets 25634 bytes 32481540 (30.9 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 13396 bytes 1586775 (1.5 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1 (Local Loopback)
RX packets 84 bytes 8028 (7.8 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 84 bytes 8028 (7.8 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
vif5.0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 10.137.1.1 netmask 255.255.255.255 broadcast 0.0.0.0
inet6 fe80::fcff:ffff:feff:ffff prefixlen 64 scopeid 0x20<link>
ether fe:ff:ff:ff:ff:ff txqueuelen 32 (Ethernet)
RX packets 13246 bytes 1385694 (1.3 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 24267 bytes 32251590 (30.7 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
I've attempted to install the kvalo ath10k firmware listed on github but it did
no good. md5sums of the files were the same as what I had anyways
modinfo ath10k_pci produces the following output
filename: /lib/modules/4.4.31-
11.pvops.qubes.x86_64/kernel/drivers/net/wireless/ath/ath10k/ ath10k_pci.ko
firmware: ath10k/QCA9377/hw1.0/board.bin
firmware: ath10k/QCA9377/hw1.0/firmware-5.bin
firmware: ath10k/QCA6174/hw3.0/board-2.bin
firmware: ath10k/QCA6174/hw3.0/board.bin
firmware: ath10k/QCA6174/hw3.0/firmware-5.bin
firmware: ath10k/QCA6174/hw3.0/firmware-4.bin
firmware: ath10k/QCA6174/hw2.1/board-2.bin
firmware: ath10k/QCA6174/hw2.1/board.bin
firmware: ath10k/QCA6174/hw2.1/firmware-5.bin
firmware: ath10k/QCA6174/hw2.1/firmware-4.bin
firmware: ath10k/QCA988X/hw2.0/board-2.bin
firmware: ath10k/QCA988X/hw2.0/board.bin
firmware: ath10k/QCA988X/hw2.0/firmware-5.bin
firmware: ath10k/QCA988X/hw2.0/firmware-4.bin
firmware: ath10k/QCA988X/hw2.0/firmware-3.bin
firmware: ath10k/QCA988X/hw2.0/firmware-2.bin
firmware: ath10k/QCA988X/hw2.0/firmware.bin
license: Dual BSD/GPL
description: Driver support for Atheros QCA988X PCIe devices
author: Qualcomm Atheros
alias: pci:v0000168Cd00000042sv*sd*bc*sc*i*
alias: pci:v0000168Cd00000040sv*sd*bc*sc*i*
alias: pci:v0000168Cd0000003Esv*sd*bc*sc*i*
alias: pci:v0000168Cd00000041sv*sd*bc*sc*i*
alias: pci:v0000168Cd0000003Csv*sd*bc*sc*i*
depends: ath10k_core
intree: Y
vermagic: 4.4.31-11.pvops.qubes.x86_64 SMP mod_unload
parm: irq_mode:0: auto, 1: legacy, 2: msi (default: 0) (uint)
parm: reset_mode:0: auto, 1: warm only (default: 0) (uint)
uname -a
Linux sys-net 4.4.31-11.pvops.qubes.x86_64 #1 SMP Fri Nov 11 00:43:28 UTC
2016 x86_64 x86_64 x86_64 GNU/Linux
lsmod
Module Size Used by
iptable_raw 16384 1
fuse 98304 3
xt_nat 16384 4
xen_netback 49152 1
xt_REDIRECT 16384 1
nf_nat_redirect 16384 1 xt_REDIRECT
ip6table_filter 16384 1
ip6_tables 28672 1 ip6table_filter
xt_conntrack 16384 2
ipt_MASQUERADE 16384 1
nf_nat_masquerade_ipv4 16384 1 ipt_MASQUERADE
iptable_nat 16384 1
nf_conntrack_ipv4 16384 3
nf_defrag_ipv4 16384 1 nf_conntrack_ipv4
nf_nat_ipv4 16384 1 iptable_nat
nf_nat 24576 4
nt_nat_redirect,nf_nat_ipv4,xt_nat,nf_nat_masquerade_ipv4
nf_conntrack 106496 5
nf_nat,nf_nat_ipv4,xt_conntrack,nf_nat_masquerade_ipv4,nf_conntrack_ipv4
ath10k_pci 45056 1
ath10k_core 270336 1 ath10k_pci
ath 28672 1 ath10k_core
mac80211 708608 1 ath10k_core
cfg80211 557056 3 ath,mac80211,ath10k_core
rfkill 24576 2 cfg80211
rtsx_pci 53248 1
mfd_core 16384 1 rtsx_pci
r8169 81920 0
mii 16384 1 r8169
intel_rapl 20480 0
iosf_mbi 16384 1 intel_rapl
x86_pkg_temp_thermal 16384 0
coretemp 16384 0
crct10dif_pclmul 16384 0
crc32_pclmul 16384 0
crc32c_intel 24576 0
pcspkr 16384 0
xen_pcifront 20480 0
dummy_hcd 36864 0
udc_core 24576 1 dummy_hcd
u2mfn 16384 0
xen_blkback 45056 0
xenfs 16384 1
xen_privcmd 16384 9 xenfs
xen_blkfront 40960 6
I will attempt to do a couple more things but I am at a complete loss. Posting
the output of dmesg below. If I can figure out a way to create a link ill edit.
Thanks.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.4.31-11.pvops.qubes.x86_64 (user@release) (gcc
version 5.3.1 20160406 (Red Hat 5.3.1-6) (GCC) ) #1 SMP Fri Nov 11 00:43:28 UTC
2016
[ 0.000000] Command line: root=/dev/mapper/dmroot ro nomodeset console=hvc0
rd_NO_PLYMOUTH rd.plymouth.enable=0 plymouth.enable=0 nopat iommu=soft
swiotlb=8192
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: xstate_offset[3]: 960, xstate_sizes[3]: 64
[ 0.000000] x86/fpu: xstate_offset[4]: 1024, xstate_sizes[4]: 64
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point
registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x08: 'MPX bounds registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x10: 'MPX CSR'
[ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 1088
bytes, using 'standard' format.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] ACPI in unprivileged domain disabled
[ 0.000000] Released 0 page(s)
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] Xen: [mem 0x0000000000000000-0x000000000009ffff] usable
[ 0.000000] Xen: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[ 0.000000] Xen: [mem 0x0000000000100000-0x0000000031ffffff] usable
[ 0.000000] Xen: [mem 0x0000000032000000-0x000000006079bfff] unusable
[ 0.000000] Xen: [mem 0x000000006079c000-0x000000006079cfff] ACPI NVS
[ 0.000000] Xen: [mem 0x000000006079d000-0x00000000607c6fff] reserved
[ 0.000000] Xen: [mem 0x00000000607c7000-0x0000000060877fff] unusable
[ 0.000000] Xen: [mem 0x0000000060878000-0x0000000061178fff] reserved
[ 0.000000] Xen: [mem 0x0000000061179000-0x000000007738dfff] unusable
[ 0.000000] Xen: [mem 0x000000007738e000-0x0000000077d7dfff] reserved
[ 0.000000] Xen: [mem 0x0000000077d7e000-0x0000000077f7dfff] ACPI NVS
[ 0.000000] Xen: [mem 0x0000000077f7e000-0x0000000077ffdfff] ACPI data
[ 0.000000] Xen: [mem 0x0000000077ffe000-0x0000000077ffefff] unusable
[ 0.000000] Xen: [mem 0x0000000077fff000-0x00000000780fffff] reserved
[ 0.000000] Xen: [mem 0x0000000078800000-0x000000007d7fffff] reserved
[ 0.000000] Xen: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] Xen: [mem 0x00000000fd000000-0x00000000fe7fffff] reserved
[ 0.000000] Xen: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] Xen: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] Xen: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] Xen: [mem 0x00000000fed84000-0x00000000fed84fff] reserved
[ 0.000000] Xen: [mem 0x00000000fed90000-0x00000000fed91fff] reserved
[ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved
[ 0.000000] Xen: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
[ 0.000000] x86/PAT: PAT support disabled.
[ 0.000000] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI not present or invalid.
[ 0.000000] Hypervisor detected: Xen
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x32000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR: Disabled
[ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 24576
[ 0.000000] BRK [0x0202f000, 0x0202ffff] PGTABLE
[ 0.000000] BRK [0x02030000, 0x02030fff] PGTABLE
[ 0.000000] BRK [0x02031000, 0x02031fff] PGTABLE
[ 0.000000] BRK [0x02032000, 0x02032fff] PGTABLE
[ 0.000000] BRK [0x02033000, 0x02033fff] PGTABLE
[ 0.000000] BRK [0x02034000, 0x02034fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x02056000-0x02b16fff]
[ 0.000000] NUMA turned off
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000031ffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x31e7c000-0x31e8dfff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x0000000031ffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009ffff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x0000000031ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000031ffffff]
[ 0.000000] On node 0 totalpages: 204703
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3999 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 3136 pages used for memmap
[ 0.000000] DMA32 zone: 200704 pages, LIFO batch:31
[ 0.000000] p2m virtual area at ffffc90000000000, size is 200000
[ 0.000000] Remapped 0 page(s)
[ 0.000000] SFI: Simple Firmware Interface v0.81 http://simplefirmware.org
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] e820: [mem 0x7d800000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on Xen
[ 0.000000] Xen version: 4.6.3 (preserve-AD)
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2
nr_node_ids:1
[ 0.000000] PERCPU: Embedded 34 pages/cpu @ffff880031800000 s98392 r8192
d32680 u1048576
[ 0.000000] pcpu-alloc: s98392 r8192 d32680 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] xen: PV spinlocks enabled
[ 0.000000] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes)
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total
pages: 201482
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: root=/dev/mapper/dmroot ro nomodeset
console=hvc0 rd_NO_PLYMOUTH rd.plymouth.enable=0 plymouth.enable=0 nopat
iommu=soft swiotlb=8192
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] software IO TLB [mem 0x2f800000-0x30800000] (16MB) mapped at
[ffff88002f800000-ffff8800307fffff]
[ 0.000000] Memory: 756412K/818812K available (7540K kernel code, 1249K
rwdata, 3412K rodata, 1528K init, 1472K bss, 62400K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=2
[ 0.000000] Using NULL legacy PIC
[ 0.000000] NR_IRQS:4352 nr_irqs:48 0
[ 0.000000] xen:events: Using FIFO-based ABI
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0-1.
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] console [hvc0] enabled
[ 0.000000] clocksource: xen: mask: 0xffffffffffffffff max_cycles:
0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[ 0.000000] Xen: using vcpuop timer interface
[ 0.000000] installing Xen timer for CPU 0
[ 0.000000] tsc: Detected 2597.696 MHz processor
[ 0.001000] Calibrating delay loop (skipped), value calculated using timer
frequency.. 5195.39 BogoMIPS (lpj=2597696)
[ 0.001000] pid_max: default: 32768 minimum: 301
[ 0.001000] Security Framework initialized
[ 0.001000] AppArmor: AppArmor disabled by boot time parameter
[ 0.001000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.001000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.001000] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.001000] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.001000] Initializing cgroup subsys io
[ 0.001000] Initializing cgroup subsys memory
[ 0.001025] Initializing cgroup subsys devices
[ 0.001032] Initializing cgroup subsys freezer
[ 0.001037] Initializing cgroup subsys net_cls
[ 0.001042] Initializing cgroup subsys perf_event
[ 0.001048] Initializing cgroup subsys net_prio
[ 0.001053] Initializing cgroup subsys hugetlb
[ 0.001059] Initializing cgroup subsys pids
[ 0.001112] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.001117] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.001123] CPU: Physical Processor ID: 0
[ 0.001125] CPU: Processor Core ID: 1
[ 0.002204] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ 0.002209] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.031418] ftrace: allocating 28744 entries in 113 pages
[ 0.036044] cpu 0 spinlock event irq 1
[ 0.036052] Could not initialize VPMU for cpu 0, error -95
[ 0.036105] Performance Events: unsupported p6 CPU model 78 no PMU driver,
software events only.
[ 0.036591] NMI watchdog: disabled (cpu0): hardware events not enabled
[ 0.036597] NMI watchdog: Shutting down hard lockup detector on all cpus
[ 0.036678] SMP alternatives: switching to SMP code
[ 0.059009] installing Xen timer for CPU 1
[ 0.059024] cpu 1 spinlock event irq 8
[ 0.060227] x86: Booted up 1 node, 2 CPUs
[ 0.060275] devtmpfs: initialized
[ 0.061040] PM: Registering ACPI NVS region [mem 0x6079c000-0x6079cfff]
(4096 bytes)
[ 0.061047] PM: Registering ACPI NVS region [mem 0x77d7e000-0x77f7dfff]
(2097152 bytes)
[ 0.061126] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff,
max_idle_ns: 1911260446275000 ns
[ 0.061167] atomic64_test: passed for x86-64 platform with CX8 and with SSE
[ 0.061167] pinctrl core: initialized pinctrl subsystem
[ 0.081517] RTC time: 165:165:165, date: 165/165/65
[ 0.081646] NET: Registered protocol family 16
[ 0.081658] xen:grant_table: Grant tables using version 1 layout
[ 0.081668] Grant table initialized
[ 0.082460] PCI: setting up Xen PCI frontend stub
[ 0.082466] PCI: pci_cache_line_size set to 64 bytes
[ 0.085059] ACPI: Interpreter disabled.
[ 0.085059] xen:balloon: Initialising balloon driver
[ 0.086021] xen_balloon: Initialising balloon driver
[ 0.086066] vgaarb: loaded
[ 0.086104] SCSI subsystem initialized
[ 0.086119] libata version 3.00 loaded.
[ 0.086119] usbcore: registered new interface driver usbfs
[ 0.086119] usbcore: registered new interface driver hub
[ 0.086119] usbcore: registered new device driver usb
[ 0.087012] dmi: Firmware registration failed.
[ 0.087046] PCI: System does not support PCI
[ 0.087046] PCI: System does not support PCI
[ 0.087073] NetLabel: Initializing
[ 0.087077] NetLabel: domain hash size = 128
[ 0.087080] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.087094] NetLabel: unlabeled traffic allowed by default
[ 0.087141] amd_nb: Cannot enumerate AMD northbridges
[ 0.087168] clocksource: Switched to clocksource xen
[ 0.091751] pnp: PnP ACPI: disabled
[ 0.093642] NET: Registered protocol family 2
[ 0.093751] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.093776] TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
[ 0.093789] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.093806] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.093813] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.093850] NET: Registered protocol family 1
[ 0.093860] PCI: CLS 0 bytes, default 64
[ 0.093910] Unpacking initramfs...
[ 0.101002] Freeing initrd memory: 11012K (ffff880002056000 -
ffff880002b17000)
[ 0.101476] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.101505] audit: initializing netlink subsys (disabled)
[ 0.101519] audit: type=2000 audit(1483492881.562:1): initialized
[ 0.101684] Initialise system trusted keyring
[ 0.102722] zbud: loaded
[ 0.102926] VFS: Disk quotas dquot_6.6.0
[ 0.102954] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.103150] hugetlbfs: disabling because there are no supported hugepage
sizes
[ 0.103236] Key type big_key registered
[ 0.106679] NET: Registered protocol family 38
[ 0.106688] Key type asymmetric registered
[ 0.106692] Asymmetric key parser 'x509' registered
[ 0.106724] Block layer SCSI generic (bsg) driver version 0.4 loaded (major
250)
[ 0.106770] io scheduler noop registered
[ 0.106774] io scheduler deadline registered
[ 0.106813] io scheduler cfq registered (default)
[ 0.106873] intel_idle: does not run on family 6 model 78
[ 0.106971] xen:xen_evtchn: Event-channel device installed
[ 0.107264] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.107565] Non-volatile memory driver v1.3
[ 0.107604] Linux agpgart interface v0.103
[ 0.107843] libphy: Fixed MDIO Bus: probed
[ 0.107888] usbcore: registered new interface driver usbserial
[ 0.215229] usbcore: registered new interface driver usbserial_generic
[ 0.215239] usbserial: USB Serial support registered for generic
[ 0.215262] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.231033] clocksource: tsc: mask: 0xffffffffffffffff max_cycles:
0x2571bb9db05, max_idle_ns: 440795325099 ns
[ 1.231189] i8042: No controller found
[ 1.231350] mousedev: PS/2 mouse device common for all mice
[ 1.231453] device-mapper: uevent: version 1.0.3
[ 1.231527] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised:
dm-devel @ redhat.com
[ 1.231608] dmi-sysfs: dmi entry is absent.
[ 1.231634] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.231689] usbcore: registered new interface driver usbhid
[ 1.231693] usbhid: USB HID core driver
[ 1.231755] drop_monitor: Initializing network drop monitor service
[ 1.231815] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 1.232021] Initializing XFRM netlink socket
[ 1.232126] NET: Registered protocol family 10
[ 1.232309] mip6: Mobile IPv6
[ 1.232329] NET: Registered protocol family 17
[ 1.232353] mce: Unable to init device /dev/mcelog (rc: -5)
[ 1.232446] AVX2 version of gcm_enc/dec engaged.
[ 1.232450] AES CTR mode by8 optimization enabled
[ 1.253423] registered taskstats version 1
[ 1.253445] Loading compiled-in X.509 certificates
[ 1.253474] zswap: loaded using pool lzo/zbud
[ 1.253535] xenbus_probe_frontend: Device with no driver: device/vbd/51712
[ 1.253539] xenbus_probe_frontend: Device with no driver: device/vbd/51728
[ 1.253543] xenbus_probe_frontend: Device with no driver: device/vbd/51744
[ 1.253548] xenbus_probe_frontend: Device with no driver: device/vbd/51760
[ 1.253565] xenbus_probe_frontend: Device with no driver: device/pci/0
[ 1.253631] Magic number: 1:252:3141
[ 1.253651] hctosys: unable to open rtc device (rtc0)
[ 1.254249] Freeing unused kernel memory: 1528K (ffffffff81d3a000 -
ffffffff81eb8000)
[ 1.254256] Write protecting the kernel read-only data: 12288k
[ 1.256861] Freeing unused kernel memory: 640K (ffff880001760000 -
ffff880001800000)
[ 1.257154] Freeing unused kernel memory: 684K (ffff880001b55000 -
ffff880001c00000)
[ 1.260042] random: modprobe: uninitialized urandom read (8 bytes read, 61
bits of entropy available)
[ 1.279922] blkfront: xvda: flush diskcache: enabled; persistent grants:
enabled; indirect descriptors: enabled;
[ 1.282968] blkfront: xvdb: flush diskcache: enabled; persistent grants:
enabled; indirect descriptors: enabled;
[ 1.290801] blkfront: xvdc: flush diskcache: enabled; persistent grants:
enabled; indirect descriptors: enabled;
[ 1.296442] blkfront: xvdd: barrier or flush: disabled; persistent grants:
enabled; indirect descriptors: enabled;
[ 1.372130] random: cat: uninitialized urandom read (8 bytes read, 89 bits
of entropy available)
[ 1.374276] random: cat: uninitialized urandom read (8 bytes read, 91 bits
of entropy available)
[ 1.376298] random: cat: uninitialized urandom read (8 bytes read, 91 bits
of entropy available)
[ 1.387265] random: sfdisk: uninitialized urandom read (4 bytes read, 93
bits of entropy available)
[ 1.387438] xvdc: xvdc1 xvdc2
[ 1.392780] random: mkswap: uninitialized urandom read (8 bytes read, 95
bits of entropy available)
[ 1.392922] random: mkswap: uninitialized urandom read (16 bytes read, 95
bits of entropy available)
[ 1.397899] random: cat: uninitialized urandom read (8 bytes read, 95 bits
of entropy available)
[ 1.403641] random: modprobe: uninitialized urandom read (8 bytes read, 95
bits of entropy available)
[ 1.404300] random: mkdir: uninitialized urandom read (8 bytes read, 95 bits
of entropy available)
[ 1.404990] EXT4-fs (dm-0): couldn't mount as ext3 due to feature
incompatibilities
[ 1.405057] EXT4-fs (dm-0): couldn't mount as ext2 due to feature
incompatibilities
[ 1.406126] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts:
(null)
[ 1.433807] EXT4-fs (xvdd): mounting ext3 file system using the ext4
subsystem
[ 1.434656] EXT4-fs (xvdd): mounted filesystem with ordered data mode. Opts:
(null)
[ 1.489531] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT
+SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS
+ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 1.489565] systemd[1]: Detected virtualization xen.
[ 1.489574] systemd[1]: Detected architecture x86-64.
[ 1.489900] systemd[1]: No hostname configured.
[ 1.489909] systemd[1]: Set hostname to <localhost>.
[ 1.524997] random: nonblocking pool is initialized
[ 1.544649] systemd[1]: Reached target Remote File Systems.
[ 1.544850] systemd[1]: Listening on Journal Audit Socket.
[ 1.544946] systemd[1]: Reached target Encrypted Volumes.
[ 1.545053] systemd[1]: Listening on udev Control Socket.
[ 1.545132] systemd[1]: Started Forward Password Requests to Wall Directory
Watch.
[ 1.545217] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 1.545295] systemd[1]: Started Dispatch Password Requests to Console
Directory Watch.
[ 1.545355] systemd[1]: Listening on udev Kernel Socket.
[ 1.545687] systemd[1]: Created slice User and Session Slice.
[ 1.545769] systemd[1]: Listening on Journal Socket.
[ 1.546348] systemd[1]: Listening on Process Core Dump Socket.
[ 1.546494] systemd[1]: Created slice System Slice.
[ 1.554150] systemd[1]: Mounting /proc/xen...
[ 1.555241] systemd[1]: Starting File System Check on Root Device...
[ 1.559030] systemd[1]: Starting Load legacy module configuration...
[ 1.559385] systemd[1]: Created slice system-getty.slice.
[ 1.563027] systemd[1]: Starting Setup Virtual Console...
[ 1.565934] systemd[1]: Mounting Debug File System...
[ 1.568243] systemd[1]: Mounting POSIX Message Queue File System...
[ 1.570181] systemd[1]: Reached target Slices.
[ 1.646120] systemd[1]: Starting Create list of required static device nodes
for the current kernel...
[ 1.648790] systemd[1]: Starting Load Kernel Modules...
[ 1.649288] systemd[1]: Created slice system-serial\x2dgetty.slice.
[ 1.650893] systemd[1]: Listening on Journal Socket (/dev/log).
[ 1.652901] dummy_hcd dummy_hcd.0: USB Host+Gadget Emulator, driver 02 May
2005
[ 1.652911] dummy_hcd dummy_hcd.0: Dummy host controller
[ 1.652956] dummy_hcd dummy_hcd.0: new USB bus registered, assigned bus
number 1
[ 1.652998] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.653012] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.653019] usb usb1: Product: Dummy host controller
[ 1.653024] usb usb1: Manufacturer: Linux 4.4.31-11.pvops.qubes.x86_64
dummy_hcd
[ 1.653031] usb usb1: SerialNumber: dummy_hcd.0
[ 1.653115] hub 1-0:1.0: USB hub found
[ 1.653127] hub 1-0:1.0: 1 port detected
[ 1.654220] systemd[1]: Starting Journal Service...
[ 1.655024] systemd[1]: tmp.mount: Directory /tmp to mount over is not
empty, mounting anyway.
[ 1.656023] systemd[1]: Mounting Temporary Directory...
[ 1.656256] systemd[1]: Set up automount Arbitrary Executable File Formats
File System Automount Point.
[ 1.658974] systemd[1]: Mounted Debug File System.
[ 1.659539] systemd[1]: Mounted POSIX Message Queue File System.
[ 1.659600] systemd[1]: Mounted Temporary Directory.
[ 1.659653] systemd[1]: Mounted /proc/xen.
[ 1.659954] systemd[1]: Started File System Check on Root Device.
[ 1.660753] systemd[1]: Started Load legacy module configuration.
[ 1.660988] systemd[1]: Started Setup Virtual Console.
[ 1.661313] systemd[1]: Started Create list of required static device nodes
for the current kernel.
[ 1.661540] systemd[1]: Started Load Kernel Modules.
[ 1.662712] audit: type=1130 audit(1483492883.123:2): pid=1 uid=0
auid=4294967295 ses=4294967295 msg='unit=systemd-modules-load comm="systemd"
exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1.668851] systemd[1]: Started Journal Service.
[ 1.668979] audit: type=1130 audit(1483492883.129:3): pid=1 uid=0
auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd"
exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1.887711] audit: type=1130 audit(1483492883.348:4): pid=1 uid=0
auid=4294967295 ses=4294967295 msg='unit=systemd-sysctl comm="systemd"
exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1.893214] audit: type=1130 audit(1483492883.354:5): pid=1 uid=0
auid=4294967295 ses=4294967295 msg='unit=qubes-db comm="systemd"
exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1.901200] EXT4-fs (dm-0): re-mounted. Opts: (null)
[ 1.902778] audit: type=1130 audit(1483492883.363:6): pid=1 uid=0
auid=4294967295 ses=4294967295 msg='unit=systemd-remount-fs comm="systemd"
exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1.949629] audit: type=1130 audit(1483492883.410:7): pid=1 uid=0
auid=4294967295 ses=4294967295 msg='unit=fedora-readonly comm="systemd"
exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1.955160] audit: type=1130 audit(1483492883.416:8): pid=1 uid=0
auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup-dev
comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=?
res=success'
[ 1.987003] systemd-journald[204]: Received request to flush runtime journal
from PID 1
[ 2.028201] audit: type=1130 audit(1483492883.489:9): pid=1 uid=0
auid=4294967295 ses=4294967295 msg='unit=systemd-random-seed comm="systemd"
exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 2.031126] audit: type=1130 audit(1483492883.492:10): pid=1 uid=0
auid=4294967295 ses=4294967295 msg='unit=systemd-udev-trigger comm="systemd"
exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 2.116984] pcifront pci-0: Installing PCI frontend
[ 2.117235] pcifront pci-0: Creating PCI Frontend Bus 0000:00
[ 2.117275] pcifront pci-0: PCI host bridge to bus 0000:00
[ 2.117282] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 2.117287] pci_bus 0000:00: root bus resource [mem 0x00000000-0x7fffffffff]
[ 2.117291] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 2.117392] pci 0000:00:00.0: [168c:0042] type 00 class 0x028000
[ 2.117853] pci 0000:00:00.0: reg 0x10: [mem 0x94200000-0x943fffff 64bit]
[ 2.123269] input: PC Speaker as /devices/platform/pcspkr/input/input0
[ 2.123445] pci 0000:00:01.0: [10ec:5287] type 00 class 0xff0000
[ 2.123701] pci 0000:00:01.0: reg 0x10: [mem 0x94405000-0x94405fff]
[ 2.124627] pci 0000:00:01.0: [Firmware Bug]: reg 0x30: invalid BAR (can't
size)
[ 2.125227] pci 0000:00:01.0: supports D1 D2
[ 2.125488] pci 0000:00:01.1: [10ec:8168] type 00 class 0x020000
[ 2.125809] pci 0000:00:01.1: reg 0x10: [io 0x3000-0x30ff]
[ 2.126416] pci 0000:00:01.1: reg 0x18: [mem 0x94404000-0x94404fff 64bit]
[ 2.126728] pci 0000:00:01.1: reg 0x20: [mem 0x94400000-0x94403fff 64bit]
[ 2.127254] pci 0000:00:01.1: supports D1 D2
[ 2.132739] pcifront pci-0: claiming resource 0000:00:00.0/0
[ 2.132751] pcifront pci-0: claiming resource 0000:00:01.0/0
[ 2.132757] pcifront pci-0: claiming resource 0000:00:01.1/0
[ 2.132762] pcifront pci-0: claiming resource 0000:00:01.1/2
[ 2.132767] pcifront pci-0: claiming resource 0000:00:01.1/4
[ 2.171346] intel_rapl: Found RAPL domain package
[ 2.171356] intel_rapl: Found RAPL domain core
[ 2.171362] intel_rapl: Found RAPL domain uncore
[ 2.171368] intel_rapl: Found RAPL domain dram
[ 2.181704] EXT4-fs (xvdb): mounted filesystem with ordered data mode. Opts:
discard
[ 2.223582] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.223656] r8169 0000:00:01.1: Xen PCI mapped GSI19 to IRQ22
[ 2.226954] r8169 0000:00:01.1 eth0: RTL8411 at 0xffffc90000416000,
54:ab:3a:81:38:24, XID 1c800800 IRQ 23
[ 2.226966] r8169 0000:00:01.1 eth0: jumbo features [frames: 9200 bytes, tx
checksumming: ko]
[ 2.227285] rtsx_pci 0000:00:01.0: Xen PCI mapped GSI16 to IRQ24
[ 2.227510] rtsx_pci 0000:00:01.0: rtsx_pci_acquire_irq: pcr->msi_en = 1,
pci->irq = 25
[ 2.227577] BUG: unable to handle kernel paging request at ffffc90000418010
[ 2.227584] IP: [<ffffffff813caaee>] iowrite32+0x2e/0x40
[ 2.227592] PGD 31e45067 PUD 31e44067 PMD 2df20067 PTE 8010000094405075
[ 2.227598] Oops: 0003 [#1] SMP
[ 2.227602] Modules linked in: rfkill rtsx_pci(+) r8169 mfd_core mii
intel_rapl iosf_mbi x86_pkg_temp_thermal coretemp crct10dif_pclmul crc32_pclmul
crc32c_intel pcspkr xen_pcifront dummy_hcd udc_core xen_blkback xenfs
xen_privcmd u2mfn(O) xen_blkfront
[ 2.227623] CPU: 1 PID: 296 Comm: systemd-udevd Tainted: G O
4.4.31-11.pvops.qubes.x86_64 #1
[ 2.227628] task: ffff88002ddf1e00 ti: ffff88002efb4000 task.ti:
ffff88002efb4000
[ 2.227633] RIP: e030:[<ffffffff813caaee>] [<ffffffff813caaee>]
iowrite32+0x2e/0x40
[ 2.227640] RSP: e02b:ffff88002efb7a10 EFLAGS: 00010296
[ 2.227643] RAX: ffffc90000418000 RBX: 0000000000000400 RCX: 00000000fffffffa
[ 2.227647] RDX: ffff88002efb7a47 RSI: ffffc90000418010 RDI: 00000000bc320000
[ 2.227650] RBP: ffff88002efb7a30 R08: 0000000000000000 R09: ffff88002f028000
[ 2.227654] R10: 0000000000000000 R11: ffff88002efb79a8 R12: ffff88002ef6a400
[ 2.227657] R13: ffff88002efb7a47 R14: ffff88002e556840 R15: ffff88002ef6a400
[ 2.227663] FS: 00007f146c4448c0(0000) GS:ffff880031900000(0000)
knlGS:ffff880031900000
[ 2.227668] CS: e033 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 2.227671] CR2: ffff8000004a2028 CR3: 000000002e0e1000 CR4: 0000000000042660
[ 2.227675] Stack:
[ 2.227677] ffffffffa00a9358 ffff88002ef6a400 ffff88002cfa9098
ffffffff81c16a80
[ 2.227683] ffff88002efb7a58 ffffffffa00ace7c 0402000000000000
00000000fa56cdea
[ 2.227689] ffff88002ef6a400 ffff88002efb7a80 ffffffffa00ad135
00000000fa56cdea
[ 2.227695] Call Trace:
[ 2.227701] [<ffffffffa00a9358>] ? rtsx_pci_read_register+0x38/0x80
[rtsx_pci]
[ 2.227709] [<ffffffffa00ace7c>] rtl8411_init_common_params+0x7c/0xb0
[rtsx_pci]
[ 2.227716] [<ffffffffa00ad135>] rtl8411b_init_params+0x25/0xc0 [rtsx_pci]
[ 2.227721] [<ffffffffa00ab55d>] rtsx_pci_probe+0x85d/0xa10 [rtsx_pci]
[ 2.227726] [<ffffffff813fb6d5>] local_pci_probe+0x45/0xa0
[ 2.235001] [<ffffffff813fcadd>] pci_device_probe+0xfd/0x140
[ 2.235001] [<ffffffff814e6c52>] driver_probe_device+0x222/0x490
[ 2.235001] [<ffffffff814e6f44>] __driver_attach+0x84/0x90
[ 2.235001] [<ffffffff814e6ec0>] ? driver_probe_device+0x490/0x490
[ 2.235001] [<ffffffff814e471c>] bus_for_each_dev+0x6c/0xc0
[ 2.235001] [<ffffffff814e640e>] driver_attach+0x1e/0x20
[ 2.235001] [<ffffffff814e5f4b>] bus_add_driver+0x1eb/0x280
[ 2.235001] [<ffffffffa00b7000>] ? 0xffffffffa00b7000
[ 2.235001] [<ffffffff814e7810>] driver_register+0x60/0xe0
[ 2.235001] [<ffffffff813fb01c>] __pci_register_driver+0x4c/0x50
[ 2.235001] [<ffffffffa00b701e>] rtsx_pci_driver_init+0x1e/0x1000 [rtsx_pci]
[ 2.235001] [<ffffffff81002123>] do_one_initcall+0xb3/0x200
[ 2.235001] [<ffffffff81754568>] ? preempt_schedule_common+0x18/0x30
[ 2.235001] [<ffffffff8175459c>] ? _cond_resched+0x1c/0x30
[ 2.235001] [<ffffffff811ffb76>] ? kmem_cache_alloc_trace+0x196/0x210
[ 2.235001] [<ffffffff8119ef90>] ? do_init_module+0x27/0x1cb
[ 2.235001] [<ffffffff8119efc8>] do_init_module+0x5f/0x1cb
[ 2.235001] [<ffffffff8111e78e>] load_module+0x151e/0x1a70
[ 2.235001] [<ffffffff8111ae20>] ? __symbol_put+0x60/0x60
[ 2.235001] [<ffffffff81226200>] ? kernel_read+0x50/0x80
[ 2.235001] [<ffffffff8111ef24>] SYSC_finit_module+0xb4/0xe0
[ 2.235001] [<ffffffff8111ef6e>] SyS_finit_module+0xe/0x10
[ 2.235001] [<ffffffff817585ee>] entry_SYSCALL_64_fastpath+0x12/0x71
[ 2.235001] Code: ff ff 03 00 77 25 48 81 fe 00 00 01 00 76 07 0f b7 d6 89
f8 ef c3 55 48 89 f7 48 c7 c6 c8 99 a9 81 48 89 e5 e8 54 fe ff ff 5d c3 <89> 3e
c3 66 66 66 66 66 66 2e 0f 1f 84 00 00 00 00 00 48 81 ff
[ 2.235001] RIP [<ffffffff813caaee>] iowrite32+0x2e/0x40
[ 2.235001] RSP <ffff88002efb7a10>
[ 2.235001] CR2: ffffc90000418010
[ 2.235001] ---[ end trace cea42d48a25df738 ]---
[ 2.256393] cfg80211: World regulatory domain updated:
[ 2.256403] cfg80211: DFS Master region: unset
[ 2.256406] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp), (dfs_cac_time)
[ 2.256415] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000
mBm), (N/A)
[ 2.256422] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz
AUTO), (N/A, 2000 mBm), (N/A)
[ 2.256427] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000
mBm), (N/A)
[ 2.256433] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz
AUTO), (N/A, 2000 mBm), (N/A)
[ 2.256438] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz
AUTO), (N/A, 2000 mBm), (0 s)
[ 2.256443] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000
mBm), (0 s)
[ 2.256448] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000
mBm), (N/A)
[ 2.256453] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0
mBm), (N/A)
[ 2.262167] r8169 0000:00:01.1 enp0s1f1: renamed from eth0
[ 5.101302] Adding 1048572k swap on /dev/xvdc1. Priority:-1 extents:1
across:1048572k SSFS
[ 5.140106] nf_conntrack version 0.5.0 (6017 buckets, 24068 max)
[ 5.202047] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 5.486215] IPv6: ADDRCONF(NETDEV_UP): enp0s1f1: link is not ready
[ 5.513347] r8169 0000:00:01.1 enp0s1f1: link down
[ 5.513374] r8169 0000:00:01.1 enp0s1f1: link down
[ 5.516086] IPv6: ADDRCONF(NETDEV_UP): enp0s1f1: link is not ready
[ 6.572989] fuse init (API version 7.23)
[ 8.805626] r8169 0000:00:01.1 enp0s1f1: link up
[ 8.805668] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s1f1: link becomes ready
[ 189.857670] IPv6: ADDRCONF(NETDEV_UP): vif3.0: link is not ready
[ 191.909627] vif vif-3-0 vif3.0: Guest Rx ready
[ 191.909651] IPv6: ADDRCONF(NETDEV_CHANGE): vif3.0: link becomes ready
I will keep trying random things...Fingers Crossed.
--
You received this message because you are subscribed to the Google Groups
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to qubes-users+unsubscr...@googlegroups.com.
To post to this group, send email to qubes-users@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/qubes-users/53976622-9d8e-4f9d-949a-a80d0a90cf3a%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
