Hello, a friend of mine updated recently from Q3.1 to Q3.2. Since then he has weird issues with connecting to the internet. It looks like sys-net is not able to get an IP-address via DHCP. If he sets up a manual connection with fixed IP-addresses it works. We unsuccessfully tried to hunt down the problems source. - He tried to change the template on which sys-net is based from Fedora 23 to Fedora 24 (from the official Qubes repository) - He tried out to use different kernels: 4.4.11-11 and 4.4.38-11 - It works on the same machine with a xubuntu-live-system. - Here is a log from a DHCP attempt: -------------------------------------------------------------------------------- [user@sys-net Documents]$ cat NM_log.txt -- Logs begin at Mon 2017-01-30 13:53:38 CET. -- Jan 31 00:09:03 sys-net dhclient[1181]: DHCPDISCOVER on wlp0s1 to 255.255.255.255 port 67 interval 20 (xid=0x40ab3d7d) Jan 31 00:09:07 sys-net dhclient[1181]: receive_packet failed on wlp0s1: Network is down Jan 31 00:09:07 sys-net NetworkManager[540]: <info> WiFi hardware radio set disabled Jan 31 00:09:07 sys-net NetworkManager[540]: <info> (wlp0s1): device state change: IP-config -> unavailable (reason 'none') [70 20 0] Jan 31 00:09:07 sys-net NetworkManager[540]: <info> (wlp0s1): canceled DHCP transaction, DHCP client pid 1181 Jan 31 00:09:07 sys-net NetworkManager[540]: <info> (wlp0s1): DHCPv4 state changed unknown -> done Jan 31 00:09:07 sys-net NetworkManager[540]: <info> NetworkManager state is now DISCONNECTED Jan 31 00:09:07 sys-net NetworkManager[540]: <info> WiFi now disabled by radio killswitch Jan 31 00:09:07 sys-net NetworkManager[540]: <warn> Failed to GDBus.Error:fi.w1.wpa_supplicant1.NotConnected: This interface is not connected: disconnect. Jan 31 00:09:07 sys-net NetworkManager[540]: <warn> Failed to GDBus.Error:fi.w1.wpa_supplicant1.NotConnected: This interface is not connected: disconnect. Jan 31 00:09:29 sys-net NetworkManager[540]: <info> WiFi hardware radio set enabled Jan 31 00:09:30 sys-net NetworkManager[540]: <info> WiFi now enabled by radio killswitch Jan 31 00:09:30 sys-net NetworkManager[540]: <info> (wlp0s1) supports 5 scan SSIDs Jan 31 00:09:30 sys-net NetworkManager[540]: <info> (wlp0s1): supplicant interface state: starting -> ready Jan 31 00:09:30 sys-net NetworkManager[540]: <info> (wlp0s1): device state change: unavailable -> disconnected (reason 'supplicant-available') [20 30 42] Jan 31 00:09:32 sys-net NetworkManager[540]: <info> (wlp0s1): supplicant interface state: ready -> inactive Jan 31 00:09:39 sys-net NetworkManager[540]: <info> (wlp0s1): Activation: starting connection 'Hide&Seek' (8d633039-62bf-4625-8639-b23b318c13ff) Jan 31 00:09:39 sys-net NetworkManager[540]: <info> (wlp0s1): device state change: disconnected -> prepare (reason 'none') [30 40 0] Jan 31 00:09:39 sys-net NetworkManager[540]: <info> NetworkManager state is now CONNECTING Jan 31 00:09:39 sys-net NetworkManager[540]: <info> (wlp0s1): device state change: prepare -> config (reason 'none') [40 50 0] Jan 31 00:09:39 sys-net NetworkManager[540]: <info> (wlp0s1): Activation: (wifi) connection 'Hide&Seek' has security, and secrets exist. No new secrets needed. Jan 31 00:09:39 sys-net NetworkManager[540]: <info> Config: added 'ssid' value 'Hide&Seek' Jan 31 00:09:39 sys-net NetworkManager[540]: <info> Config: added 'scan_ssid' value '1' Jan 31 00:09:39 sys-net NetworkManager[540]: <info> Config: added 'key_mgmt' value 'WPA-PSK' Jan 31 00:09:39 sys-net NetworkManager[540]: <info> Config: added 'psk' value '<omitted>' Jan 31 00:09:39 sys-net NetworkManager[540]: <info> Config: set interface ap_scan to 1 Jan 31 00:09:39 sys-net NetworkManager[540]: <info> (wlp0s1): supplicant interface state: inactive -> associating Jan 31 00:09:39 sys-net NetworkManager[540]: <info> (wlp0s1): supplicant interface state: associating -> associated Jan 31 00:09:40 sys-net NetworkManager[540]: <info> (wlp0s1): supplicant interface state: associated -> completed Jan 31 00:09:40 sys-net NetworkManager[540]: <info> (wlp0s1): Activation: (wifi) Stage 2 of 5 (Device Configure) successful. Connected to wireless network 'Hide&Seek'. Jan 31 00:09:40 sys-net NetworkManager[540]: <info> (wlp0s1): device state change: config -> IP-config (reason 'none') [50 70 0] Jan 31 00:09:40 sys-net NetworkManager[540]: <info> Activation (wlp0s1) Beginning DHCPv4 transaction (timeout in 45 seconds) Jan 31 00:09:40 sys-net NetworkManager[540]: <info> dhclient started with pid 1503 Jan 31 00:09:40 sys-net dhclient[1503]: DHCPDISCOVER on wlp0s1 to 255.255.255.255 port 67 interval 6 (xid=0xf3604a3b) Jan 31 00:09:46 sys-net dhclient[1503]: DHCPDISCOVER on wlp0s1 to 255.255.255.255 port 67 interval 12 (xid=0xf3604a3b) Jan 31 00:09:58 sys-net dhclient[1503]: DHCPDISCOVER on wlp0s1 to 255.255.255.255 port 67 interval 16 (xid=0xf3604a3b) Jan 31 00:10:14 sys-net dhclient[1503]: DHCPDISCOVER on wlp0s1 to 255.255.255.255 port 67 interval 19 (xid=0xf3604a3b) Jan 31 00:10:25 sys-net NetworkManager[540]: <warn> (wlp0s1): DHCPv4 request timed out. Jan 31 00:10:25 sys-net NetworkManager[540]: <info> (wlp0s1): DHCPv4 state changed unknown -> timeout Jan 31 00:10:25 sys-net NetworkManager[540]: <info> (wlp0s1): canceled DHCP transaction, DHCP client pid 1503 Jan 31 00:10:25 sys-net NetworkManager[540]: <info> (wlp0s1): DHCPv4 state changed timeout -> done Jan 31 00:10:25 sys-net NetworkManager[540]: <info> (wlp0s1): device state change: IP-config -> failed (reason 'IP-config-unavailable') [70 120 5] Jan 31 00:10:25 sys-net NetworkManager[540]: <info> NetworkManager state is now DISCONNECTED Jan 31 00:10:25 sys-net NetworkManager[540]: <warn> (wlp0s1): Activation: failed for connection 'Hide&Seek' Jan 31 00:10:25 sys-net NetworkManager[540]: <info> (wlp0s1): device state change: failed -> disconnected (reason 'none') [120 30 0] Jan 31 00:10:25 sys-net NetworkManager[540]: <warn> Connection disconnected (reason -3) Jan 31 00:10:25 sys-net NetworkManager[540]: <info> (wlp0s1): supplicant interface state: completed -> disconnected --------------------------------------------------------------------------------
Do you have any ideas how to solve this problems? Thanks :) -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/785dc43c-443d-635b-28ee-fdef2bb90324%40riseup.net. For more options, visit https://groups.google.com/d/optout.
