Hi, I created a Kali Linux HVM from a bootable ISO image.
So far, all is fine. sys-net2 is the VM that controls network and the HVM is connected to the network via the default sys-firewall2. $ ping 192.168.XX.XX PING 192.168.XX.XX (192.168.XX.XX) 56(84) bytes of data. 64 bytes from 172.30.160.217: icmp_seq=1 ttl=62 time=1.37 ms 64 bytes from 172.30.160.217: icmp_seq=2 ttl=62 time=1.03 ms ^C --- 192.168.XX.XX ping statistics --- 2 packets transmitted, 2 received, 0% packet loss, time 1001ms rtt min/avg/max/mdev = 1.033/1.205/1.378/0.175 ms I have a problem. Using ARP Scan Tool (arp-scan binary), there no ARP reply (sent in response to the ARP request). $ arp-scan 192.168.XX.XX Interface: eth0, datalink type: EN10MB (Ethernet) Starting arp-scan 1.9 with 1 hosts (http://www.nta-monitor.com/tools/arp-scan/) 192.168.XX.XX fe:ff:ff:ff:ff:ff (Unknown) 1 packets received by filter, 0 packets dropped by kernel Ending arp-scan 1.9: 1 hosts scanned in 0.636 seconds (1.57 hosts/sec). 1 responded How can I fix it ? Thanks so much. Best regards, -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/9302de29-80a3-4852-82e4-de0f4a7a1165%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.