On Saturday, June 3, 2017 at 9:45:38 AM UTC+1, new...@protonmail.ch wrote: > Hi, > > I have been frustrated trying to get Qubes fully up and running on the Intel > NUC7i3BNH. Strangely, I could not get the install working in Legacy mode. In > EFI mode, the installation went through, but Qubes would not boot until I > copied the EFI boot files over using the instructions for UEFI > troubleshooting (under "Boot device not recognised after installing"). > > (1) I still get an error on boot that says EFI_MEMMAP is not enabled and an > error that goes by very quickly that says: > > [FAILED] Failed to start Load Kernel Modules > > Do I need to worry about this? How can I fix this? > > (2) However, the system does indeed boot, and I am prompted to enter my LUKS > pw and user pw. But, Ethernet is not functioning. I have tried the > suggestions mentioned already: > in sys-net, > (a) linux-firmware-20160609-66.gita44bc811.fc23.noarch is installed. > (b) lspci shows that Intel I219-V rev 21 is there > (c) ifconfig does not show ethX in sys-net > > I have tried to manually load e1000e / e1000 using modprobe. but no luck. > > Any pointers please in how to get networking working? Really frustrated as a > new Qubes user was really looking forward to this fantastic OS!. > > TIA!
P.S. when I manually load e1000e or e1000 I do not get any errors. It just shows: e1000e: Intel Pro/1000 Network Driver - 3.2.6-k e1000e: Copyright (c) 1999 - 2015 Intel Corporation -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/86387e6a-0bce-4e70-930e-08996d6118d6%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
