NUC7i7BNH 32GB RAM 500GB M2 I was able to load Qubes 3.2 using a efi bootloader.
I am assuming with bleeding edge hardware that issues may pop-up here and there. My current issue is the ethernet driver in sys-net. lspci drivers are there and firmware version 20160609-66.gita4bbc811.fc23.noarch. "Dom0" dmesg output: pciback: driver tried to write to read-only configuration space. (bolded, not in red) See permissive attributes in sysfs. At the moment I am not able to use sys-net when I assign a static or dhcp IP. Any help would be much appreciated. -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/a594a613-f512-43da-be64-b4cba2dc3c54%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.