On Sunday, April 30, 2017 at 3:02:23 AM UTC-7, 0x...@secure.mailbox.org wrote: > Hi, > Does anyone actually make Qubes OS R 3.2 working with Ledger Nano S hardware > wallet?
Yes. Follow the Qubes instructions: https://www.qubes-os.org/doc/usb/#attaching-a-single-usb-device-to-a-qube-usb-passthrough In your AppVM, follow these extra instructions from ledger: http://support.ledgerwallet.com/knowledge_base/topics/ledger-wallet-is-not-recognized-on-linux What's working for me is these lines appended to `/rw/config/rc.local` in AppVM: # http://support.ledgerwallet.com/knowledge_base/topics/ledger-wallet-is-not-recognized-on-linux ``` #!/bin/bash echo "SUBSYSTEMS==\"usb\", ATTRS{idVendor}==\"2581\", ATTRS{idProduct}==\"1b7c\", MODE=\"0660\", OWNER=\"user\", GROUP=\"plugdev\"" >/etc/udev/rules.d/20-hw1.rules echo "SUBSYSTEMS==\"usb\", ATTRS{idVendor}==\"2581\", ATTRS{idProduct}==\"2b7c\", MODE=\"0660\", OWNER=\"user\", GROUP=\"plugdev\"" >>/etc/udev/rules.d/20-hw1.rules echo "SUBSYSTEMS==\"usb\", ATTRS{idVendor}==\"2581\", ATTRS{idProduct}==\"3b7c\", MODE=\"0660\", OWNER=\"user\", GROUP=\"plugdev\"" >>/etc/udev/rules.d/20-hw1.rules echo "SUBSYSTEMS==\"usb\", ATTRS{idVendor}==\"2581\", ATTRS{idProduct}==\"4b7c\", MODE=\"0660\", OWNER=\"user\", GROUP=\"plugdev\"" >>/etc/udev/rules.d/20-hw1.rules echo "SUBSYSTEMS==\"usb\", ATTRS{idVendor}==\"2581\", ATTRS{idProduct}==\"1807\", MODE=\"0660\", OWNER=\"user\", GROUP=\"plugdev\"" >>/etc/udev/rules.d/20-hw1.rules echo "SUBSYSTEMS==\"usb\", ATTRS{idVendor}==\"2581\", ATTRS{idProduct}==\"1808\", MODE=\"0660\", OWNER=\"user\", GROUP=\"plugdev\"" >>/etc/udev/rules.d/20-hw1.rules echo "SUBSYSTEMS==\"usb\", ATTRS{idVendor}==\"2c97\", ATTRS{idProduct}==\"0000\", MODE=\"0660\", OWNER=\"user\", GROUP=\"plugdev\"" >>/etc/udev/rules.d/20-hw1.rules echo "SUBSYSTEMS==\"usb\", ATTRS{idVendor}==\"2c97\", ATTRS{idProduct}==\"0001\", MODE=\"0660\", OWNER=\"user\", GROUP=\"plugdev\"" >>/etc/udev/rules.d/20-hw1.rules udevadm trigger udevadm control --reload-rules ``` Note: every time you switch into or out of an "app" on the ledger, the USB connection reset. So you have to run, in dom0, `qvm-block -a ...` much more frequently than you might expect. The Ledger Nano is brand new, so I haven't tested much beyond just getting the desktop apps to recognize it. -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/674fe279-1c17-495c-ba67-6dbf34467f63%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
