On Wednesday, November 22, 2017 at 11:49:16 PM UTC+2, Yuraeitha wrote: > On Wednesday, November 22, 2017 at 9:37:38 PM UTC, beso wrote: > > On Wednesday, November 22, 2017 at 11:22:47 PM UTC+2, Yuraeitha wrote: > > > On Wednesday, November 22, 2017 at 9:11:18 PM UTC, beso wrote: > > > > On Wednesday, November 22, 2017 at 5:48:43 PM UTC+2, beso wrote: > > > > > On Wednesday, November 22, 2017 at 3:00:41 PM UTC+2, beso wrote: > > > > > > On Monday, October 2, 2017 at 2:06:38 PM UTC+3, beso wrote: > > > > > > > On Monday, October 2, 2017 at 12:01:41 AM UTC+3, One7two99 wrote: > > > > > > > > Hello Beso, > > > > > > > > > > > > > > > > > Mobile Broadband is enabled in > > > > > > > > > NetworkManager Applet. > > > > > > > > > I can create new Mobile Broadband > > > > > > > > > connection but it keeps connecting > > > > > > > > > and nothing else > > > > > > > > > > > > > > > > I am using mobile broadband within Qubes and am happy to help, > > > > > > > > but honestly your question/problem is to unqualified. > > > > > > > > > > > > > > > > - what version of Qubes are you running? > > > > > > > > - what modell of mobile broadband card are you using? > > > > > > > > - how is the broadband card connected? Probably as an internal > > > > > > > > USB device. > > > > > > > > - are you using sys-usb to connect the card to your sys-net VM? > > > > > > > > Or are you passing through the whole USB controller? > > > > > > > > - have you tried to boot up a Fedora live Linux and check if > > > > > > > > your mobile broadband is working there? > > > > > > > > - what does "keeps connecting" means? > > > > > > > > > > > > > > > > My suggestion: > > > > > > > > Try to get the mobile broadband card working without Qubes > > > > > > > > (Linux Live Boot from USB-Stick). > > > > > > > > If you got it working try to make it work in Qubes. > > > > > > > > > > > > > > > > [799] > > > > > > > > > > > > > > - Laptop is ThinkPad X1 Carbon 4th gen. > > > > > > > - Qubes release 3.2(R3.2) > > > > > > > - Previous linux distros worked (ubuntu 16.04) > > > > > > > - from qvm-usb I can see that card is: Sierra Wireless > > > > > > > Incorporated Sierra Wireless EM7455 Qualcomm Snapdragon X7 > > > > > > > - do I have to attach it somewhere? > > > > > > > - As I mentioned I can create new broadband connection and even > > > > > > > select it from applet menu but it keeps connecting(applet shows > > > > > > > "circles" as trying connect). > > > > > > > I am trying to make screenshot if it helps > > > > > > > > > > PS. > > > > > [user@sys-net ~]$ ifconfig > > > > > enp0s1f6: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500 > > > > > ether 54:ee:75:aa:4d:e3 txqueuelen 1000 (Ethernet) > > > > > RX packets 0 bytes 0 (0.0 B) > > > > > RX errors 0 dropped 0 overruns 0 frame 0 > > > > > TX packets 0 bytes 0 (0.0 B) > > > > > TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 > > > > > device interrupt 26 memory 0xe1200000-e1220000 > > > > > > > > > > lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536 > > > > > inet 127.0.0.1 netmask 255.0.0.0 > > > > > inet6 ::1 prefixlen 128 scopeid 0x10<host> > > > > > loop txqueuelen 1 (Local Loopback) > > > > > RX packets 636 bytes 74412 (72.6 KiB) > > > > > RX errors 0 dropped 0 overruns 0 frame 0 > > > > > TX packets 636 bytes 74412 (72.6 KiB) > > > > > TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 > > > > > > > > > > vif2.0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 > > > > > inet 10.137.1.1 netmask 255.255.255.255 broadcast 0.0.0.0 > > > > > inet6 fe80::fcff:ffff:feff:ffff prefixlen 64 scopeid > > > > > 0x20<link> > > > > > ether fe:ff:ff:ff:ff:ff txqueuelen 32 (Ethernet) > > > > > RX packets 102007 bytes 32168371 (30.6 MiB) > > > > > RX errors 0 dropped 0 overruns 0 frame 0 > > > > > TX packets 228493 bytes 219299357 (209.1 MiB) > > > > > TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 > > > > > > > > > > wlp0s2: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 > > > > > inet 192.168.43.181 netmask 255.255.255.0 broadcast > > > > > 192.168.43.255 > > > > > inet6 fe80::e6a4:71ff:fe8a:d310 prefixlen 64 scopeid > > > > > 0x20<link> > > > > > ether e4:a4:71:8a:d3:10 txqueuelen 1000 (Ethernet) > > > > > RX packets 238240 bytes 225553537 (215.1 MiB) > > > > > RX errors 0 dropped 0 overruns 0 frame 0 > > > > > TX packets 108834 bytes 37072683 (35.3 MiB) > > > > > TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 > > > > > > > > > > > > sudo dmesg: > > > > [ 3847.841147] NetworkManager[6145]: segfault at 38 ip 0000732046957569 > > > > sp 00007ffe0cc871f0 error 4 in libnm-wwan.so[732046950000+11000] > > > > > > Also, if you have multiple of USB controllers, try sacrifice one > > > controller to sys-net, while keeping the remaining in sys-usb. > > > > > > I believe you have a laptop since you want to use an USB modem, but even > > > laptops tend to have at least two USB controllers now a days and some > > > years back. > > > > > > So verify how many USB controllers you got (NOT! ports, but controllers, > > > that is to be blond, how many USB controlling chips are there in your > > > hardware). Many developers like to put multiple of ports on a single > > > controller. Be sure you got more than one controller, and then only pass > > > one of them to your sys-net, and keeping the other in sys-usb. > > > > > > Then in practice, avoid any USB ports used for the exposed USB > > > controller, and then keep remaining USB controllers in the safer sys-usb. > > > > It is too "much" for me. It means, too complicated. I only have sys-net, no > > separated sys-usb. As I understand all my usb-s connected to sys-net > > (attached picture previous post) I will mpost my outputs below form sys-net: > > > > lsusb: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub > > Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub > > Bus 002 Device 006: ID 138a:0090 Validity Sensors, Inc. > > Bus 002 Device 005: ID 13d3:5248 IMC Networks > > Bus 002 Device 004: ID 8087:0a2b Intel Corp. > > Bus 002 Device 003: ID 1199:9079 Sierra Wireless, Inc. > > Bus 002 Device 002: ID 046d:c52f Logitech, Inc. Unifying Receiver > > Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub > > > > lspci: > > 00:00.0 USB controller: Intel Corporation Sunrise Point-LP USB 3.0 xHCI > > Controller (rev 21) > > 00:01.6 Ethernet controller: Intel Corporation Ethernet Connection I219-V > > (rev 21) > > 00:02.0 Network controller: Intel Corporation Wireless 8260 (rev 3a) > > Not a problem if its new to you, I'm not an expert my self, although I have > some, albeit limited, experience. We can try see if we can work it out, and > there is also the chances someone more knowledgeable dropping by with a > solution. But lets try have a crack at it meanwhile. I do believe it should > be fixable, unless its lack of driver/hardware support within the USB modem > itself in regards to virtualization technology. Lets hope this is not the > case, otherwise you got a problem. > > Okay so, you did a lspci, and we can see you have a USB 3.0 xHCI Controller. > > It looks like you ran lspci in a virtual machine, correct? Try again in dom0 > instead, this way we can see all the controllers, not just the ones passed > into your VM. What I'm curious about, is if you got more than one controller, > and it looks like you might, since there is often a USB 2.0 controller next > to a USB 3.0 controller. But we need to be sure first. > > At which case, if you do, then you can simply pass your USB 2.0 controller to > your sys-net, and only use your USB 2.0 ports for your internet modem, > nothing else. Keep every other USB activity to your faster USB 3.0 port. > > The lsusb is also from the terminal inside your VM right? It does look like > the driver/module at least works to some extent, perhaps even fully. Which is > a good sign. But first things first.
Correct, previous were from sys-net vm. dom0 lspci is: 00:00.0 Host bridge: Intel Corporation Skylake Host Bridge/DRAM Registers (rev 08) 00:02.0 VGA compatible controller: Intel Corporation HD Graphics 520 (rev 07) 00:08.0 System peripheral: Intel Corporation Skylake Gaussian Mixture Model 00:13.0 Non-VGA unclassified device: Intel Corporation Device 9d35 (rev 21) 00:14.0 USB controller: Intel Corporation Sunrise Point-LP USB 3.0 xHCI Controller (rev 21) 00:14.2 Signal processing controller: Intel Corporation Sunrise Point-LP Thermal subsystem (rev 21) 00:16.0 Communication controller: Intel Corporation Sunrise Point-LP CSME HECI #1 (rev 21) 00:17.0 SATA controller: Intel Corporation Sunrise Point-LP SATA Controller [AHCI mode] (rev 21) 00:1c.0 PCI bridge: Intel Corporation Device 9d10 (rev f1) 00:1c.2 PCI bridge: Intel Corporation Device 9d12 (rev f1) 00:1f.0 ISA bridge: Intel Corporation Sunrise Point-LP LPC Controller (rev 21) 00:1f.2 Memory controller: Intel Corporation Sunrise Point-LP PMC (rev 21) 00:1f.3 Audio device: Intel Corporation Sunrise Point-LP HD Audio (rev 21) 00:1f.4 SMBus: Intel Corporation Sunrise Point-LP SMBus (rev 21) 00:1f.6 Ethernet controller: Intel Corporation Ethernet Connection I219-V (rev 21) 02:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS525A PCI Express Card Reader (rev 01) 04:00.0 Network controller: Intel Corporation Wireless 8260 (rev 3a) -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/67bf7439-9b19-4902-b9c4-5e5d14dffef4%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
