Hello, I am running Qubes 3.2, with a Fedora 25 sys-usb. I have a HackRF One SDR that I am trying to attach to an appvm, with no luck.
When I run qvm-usb in dom0 to attach the USB device the command hangs and there is the following in the appvm's dmesg output: [ 490.254687] vhci_hcd vhci_hcd: pdev(0) rhport(0) sockfd(0) [ 490.254701] vhci_hcd vhci_hcd: devid(131091) speed(3) speed_str(high-speed) [ 490.463076] usb 2-1: new high-speed USB device number 93 using vhci_hcd [ 490.674105] usb 2-1: new high-speed USB device number 94 using vhci_hcd [ 490.885282] usb 2-1: new high-speed USB device number 95 using vhci_hcd [ 490.885332] usb 2-1: SetAddress Request (95) to port 0 [ 490.900735] usb 2-1: device descriptor read/8, error -71 [ 491.022552] usb 2-1: device descriptor read/8, error -71 [ 492.007163] usb usb2-port1: Cannot enable. Maybe the USB cable is bad? [ 492.007176] usb usb2-port1: unable to enumerate USB device [ 492.991256] usb usb2-port1: Cannot enable. Maybe the USB cable is bad? [ 493.879245] usb usb2-port1: Cannot enable. Maybe the USB cable is bad? The last message continues for some time before vhci_hcd gives up and disconnects the device. qvm-usb in dom0 never returns. The SDR works just fine if I use it from sys-usb directly, so the problem appears limited to how Qubes handles USB forwarding. Can anyone help with this error? I suspect not many people have an SDR to test. I am willing to help debug this but I will need help knowing what to do. Thanks, - Paul -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/ff9d6e30-dd3e-4906-bb91-a07ba4abef03%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
