‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐ On February 22, 2018 2:13 PM, Aaron Dough <aaron_do...@protonmail.ch> wrote:
> Most things seem to work fine, but Ethernet is still problematic at this > moment with Qubes 4.0 RC4, but I'll refrain from posting this here until 4.0 > becomes stable and I've had more time for testing. (If you are interested > have a look at my other post "Qubes 4.0 on Tuxedo BU1406". In essence, for > now I don't have the Ethernet-controller attached.) Qubes 4.0 seems to run well, Ethernet, WiFi, Sound and standby work as expected. Webcam wasn't tested yet, but recognized by sys-usb, so it should work too. I installed it in BIOS-mode, and had to enable IOMMU (in the bios: Advanced -> Advanced Chipset Control -> VT-d). During the configuration phase there is a message saying "Unable to reset PCI device 000:03:00.1". Click OK and ignore it for the moment, then after the initial boot enable strict reset for the ethernet controller (03:00.1) in the Devices-settings of sys-net. -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/v8FmfbTNEL82iIx2l0N7BvSDvJM_CHqEiaKdc8fIG4IB0Q5MopBngbpH3Zst4piA6gAV4UkH09jbOkyJJicUqZ1B4DXC6n9D313ByLm-QDo%3D%40protonmail.ch. For more options, visit https://groups.google.com/d/optout.