> Hi, > > I created a new sys-net (sys-net2) as network VM to use a wireless USB > adapter. > > The sys-net2 dmesg logs (guest-sys-net2.log) are filled with a bunch of > messages (4878 lines) like the following: > > ---%<------ > First lines > ---%<------ > [ 0.000000] Linux version 4.14.57-2.pvops.qubes.x86_64 > (user@build-fedora4) (gcc version 6.4.1 20170727 (Red Hat 6.4.1-1) (GCC)) #1 > SMP Tue Aug 14 14:43:33 UTC 2018 > [ 0.000000] Command line: root=/dev/mapper/dmroot ro nomodeset > console=hvc0 rd_NO_PLYMOUTH rd.plymouth.enable=0 plymouth.enable=0 nopat > [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point > registers' > [...] > [ 11.129065] usb 2-1: new high-speed USB device number 2 using vhci_hcd > [ 11.246132] usb 2-1: SetAddress Request (2) to port 0 > [ 11.286211] usb 2-1: New USB device found, idVendor=13b1, idProduct=002f > [ 11.286284] usb 2-1: New USB device strings: Mfr=1, Product=2, > SerialNumber=3 > [ 11.286369] usb 2-1: Product: Linksys AE1000 > [ 11.286429] usb 2-1: Manufacturer: Linksys > [ 12.303201] usb usb2-port1: Cannot enable. Maybe the USB cable is bad? > [ 13.191197] usb usb2-port1: Cannot enable. Maybe the USB cable is bad? > [ 14.079202] usb usb2-port1: Cannot enable. Maybe the USB cable is bad? > [ 14.967200] usb usb2-port1: Cannot enable. Maybe the USB cable is bad? > [ 14.967389] ieee80211 phy0: rt2x00usb_vendor_request: Error - Vendor > Request 0x07 failed for offset 0x1000 with error -19 > [ 14.967496] ieee80211 phy0: rt2800_probe_rt: Error - Invalid RT chipset > 0x0000, rev 0000 detected > [ 14.967594] ieee80211 phy0: rt2x00lib_probe_dev: Error - Failed to > allocate device > [ 14.967788] usbcore: registered new interface driver rt2800usb > [ 14.968575] usb 2-1: USB disconnect, device number 2 > [...] > > Additionally and deliberately focus is made on my wireless USB adapter. > > In contrast, my main sys-net with internal Ethernet port does not display > anything. > > Any help and advice would be greatly appreciated. > > Best regards. > > GD Rub > In the fact that I am not the only one : https://github.com/QubesOS/qubes-issues/issues/3778
but no solution found ... :-( -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/b95ba189-f855-4930-d045-c86f2caac9ff%40gmail.com. For more options, visit https://groups.google.com/d/optout.