Am Donnerstag, den 25.10.2018, 19:46 +0000 schrieb 'Christophe Vial' via qubes-users: Any workaround for this problem ?
Connect the hub before booting and look at lspci; all my Lenovo systems turn on the required controllers (and only them!) only after something has been connected to the physical port and requested something. In Qubes 3.2 this was annoying because there were sudden appearances of USB (or Thunderbolt) controllers in Dom0 and it seems someone turned off adding busses that appear after booting now (good decision). Achim -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/14b9c057b706c7c5a78780ff8790debdfb0b35d0.camel%40noses.com. For more options, visit https://groups.google.com/d/optout.