It worked! Thank you very much. Am Fr., 23. Nov. 2018 um 18:18 Uhr schrieb awokd <[email protected]>:
> stefan neuhaus wrote on 11/23/18 4:58 PM: > > > i use a desktop system with integrated graphics - AMD Ryzen 5 2400G - > > ASRock B450 Pro4 > > > > as far as i understand its a graphic card issue and x server is not > > starting. so i tested with a radeon r7 370 and a AMD FirePro W2100 > graphic > > card. the installer menue loaded on both cards and i could choose the > > language, but afterwards i got the message "This hardware lacks features > > required by Qubes OS. Missing features: HAP/SLAT/EPT/RVI. Without these > > features, Qubes OS will not function normally. " When i reboot the > system i > > got a [dom0] Error "...sys firewall failed... stderr: Start failed:... > > could not find capabilities for arch=x86_64... " thread #3208 > > <https://github.com/QubesOS/qubes-issues/issues/3208> doesn`t help for > > troubleshooting. when i remove the graphic card and boot with the > > integrated graphic the system halted with error. > > It sounds like you are close, here. Use the R7 370 card. Go into EFI > settings and make sure all virtualization options are enabled. Then try > to install 4.0.1 again. If you did it right, you shouldn't get the > warning about HAP etc. > > > -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/CA%2B3ek4akS9fvWosdRuRGBJprHp%2BP8FVBi5qGisBthzfqtNEvsg%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
