On Tuesday, 18 December 2018 08:18:15 UTC, smvi...@invisson.com  wrote:
> El martes, 18 de diciembre de 2018, 6:05:18 (UTC+1), Yassine  escribió:
> > 
> > Regarding issues with when unplugging thunderbolt after boot, this is due 
> > to PCI hotplugging being disabled (for obvious security reasons) - more 
> > details here https://github.com/QubesOS/qubes-issues/issues/1673
> > 
> > @Jim: following awokd's procedure you should be able to get UEFI working, 
> > also the configuration that I described for installation and 
> > post-installation were tested with UEFI only
> > 
> > Now if you reboot and the PCI devices served by the thunderbolt/usb-c are 
> > not present anymore, you'll have to manually remove them from the list of 
> > pci devices that are passed through to your NetVM or UsbVM.
> > Same for when you boot with the thunderbolt attached, you'll have to 
> > reattach the pci devices to the VM for passthrough.
> 
> Thank you Yassine! now I fully understand why this happens.
> 
> I don't really care if I have to reboot to make it work, but the problem is 
> even after reboot, it is not detected, so I have to turn off sys-firewall + 
> sys-net, unplug the adapter and plug it again and finally start the VMs again 
> for it to work, what is a bit of a PITA. I'd be happy if it was recognized 
> directly when booting, even if a later disconnects make it stop working... 
> Have any of you been able to achieve something like this at least?
> 
> Thank you!!


Ok then, you might want to test different thunderbolt BIOS configurations. TB 
Security and TB Device enumeration mode for example.

I also know from experience that some docking stations firmware have bugs that 
might require a reboot and the boot process of the docking station can itself 
take a bit of time (~20s).


-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To post to this group, send email to qubes-users@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/823d21d8-985c-4d30-a6da-6810b54039ae%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Reply via email to