I have a RAID 5 configuration that has failed. I physically removed the failed disk, inserted a new one of the same nominal capacity. Then in dom0 I used mdadm to add the new disk to the array and the new disk was successfully added in to the array. Upon every reboot now the disk is not automatically added to the RAID. I need to create the device node for the new hard drive's RAID partition and then manually enter "sudo mdadm --manage /dev/md127 --add /dev/sdc1" to complete the RAID setup. What do I need to do to make this setup automatic?
-- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/xyv3lRaE14w1yGqVz_mM0rVTgcGVUtjsihNjdYiALRZUHl9G7ClttjBn3gBgNaf9-jOq5eqPTyQTTipPqFUAk9370b7xWn3Zvn11jZvbH9Q%3D%40protonmail.com. For more options, visit https://groups.google.com/d/optout.
