Brendan, That was the issue - I was using sbc (sierra bravo charlie) not sdc (sierra delta charlie). It is the latter. After correcting the typo, subsequent commands per instructions worked without error until I got to adding the new pool with qvm-pool and the python script(s) had a fit with something. Probably a typo or lack of understanding, but I need to look at it in the AM with a fresher set of eyes. Copy/paste is still a bit tricky - but it's by design - otherwise I'd drop it in here.
DG ----- Original Message ----- From: "brendan hoar" <brendan.h...@gmail.com> To: "qubes-users" <qubes-users@googlegroups.com> Sent: Wednesday, February 12, 2020 8:23:43 PM Subject: [qubes-users] Using secondary storage I see reference to both /dev/sdc and /dev/sbc in your post. Which is it? -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/36d150f9-ad00-4cfb-9643-2f713da3f108%40googlegroups.com. -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/1126972345.61432.1581565751550.JavaMail.zimbra%40unseen.is.