Hello, I have installed a windows 10 standalone HVM qube, which works as expected. Now if I clone it, the cloned qube cannot even ping his default gateway.
Digging a bit I can see that: - sys-firewall has a route, through the proper iface, to the IP associated with the cloned HVM, but the IP shown by Windows is the one of the original qube - windows network settings show that wrong IP in the "Properties" section of the interface config pane, where the "IP settings" section has no IPv4 address or gateway defined - qvm-prefs does show the expected IP Setting the static IP config manually in window indeed works, but I guess it's not supposed to work that way. What would be the Right Way to fix the setup ? Note that while digging into Qubes networking I started with https://www.qubes-os.org/doc/networking/. The routing table example for Driver Domain shown there does not match the sys-net routing table at all - notably it mentions "eth0" which seems to hint to that doc being out of sync, with eth interfaces being named "en*" nowadays. Not sure it makes sense to keep that example, maybe now a sys-firewall example would be more fitting ? -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/589878530.833896641.1623847792671.JavaMail.root%40zimbra39-e7.