When you say that the Palisade code is already compiled on windows, do you mean it is part of the OS? Or is it just a part of the NTP4.x software? If it is already a part of Windows XP, I did not see any way to set up the service through windows. I check the add/remove windows components, and other control panel items but didn't see anything relating to the NTP service. Also, if it is configured this way, how do you specify that you are not looking to an ethernet port for timing. Most of the apps I have tried to use to do this, always want to look to the LAN for timing. I even tried NTP exe. from www.five-ten-sg.com and still was unable to make it work. It did synchronize itself to my system time, however, it did not synchronize to the GPS device. I also used the ntpd.conf from the refclock 29 and changed the dev to COM1. Thanks for the info above, I am going to continue to investigate the Palisade that is already compiled on windows....if I can find it... Thanks alot for all of your comments and suggestions.
John Kennedy _______________________________________________ questions mailing list [email protected] https://lists.ntp.isc.org/mailman/listinfo/questions
