On Sat, 28 Oct 2006 01:57:58 -0700, Hal Murray wrote: > >>I have a question as to why I cant get may garmin extrex to act as a time >>source for ntpd in NMEA mode... > ... > >>nmea: timecode 68 >>$GPRMC,051136,A,4727.1418,N,12209.8054,W,0.0,29.5,281006,18.1,E,A*09 >>nmea: timecode 68 >>$GPRMC,051138,A,4727.1416,N,12209.8053,W,0.0,29.5,281006,18.1,E,A*0E > > Those look good to me. > >> root]# ntpq -pcrv >> remote refid st t when poll reach delay offset jitter >>============================================================================== >> GPS_NMEA(0) .GPS. 1 l - 16 0 0.000 0.000 0.001 > > The 0 in the reach column indicates that the GPRMC lines are not > getting processed. I'd guess they are getting rejected by some > sanity check. > > Is the time on the box reasonably close to start with? > > The configuration with only a NMEA driver is a bit strange. > Can you add a few other servers to see if that will fix things? > > You might get more info if you turn on lots of logging/statistics.
thx Yup you were right, I thought I was off by a couple minutes but I was actually had the wrong day to so soon as I got it corrected it started working. _______________________________________________ questions mailing list [email protected] https://lists.ntp.isc.org/mailman/listinfo/questions
