Den Sun, 11 Feb 2007 16:01:38 +0100. skrev Uwe Klein: > Rune Magnussen wrote: >> Den Sun, 11 Feb 2007 14:59:59 +0100. skrev Uwe Klein: >> >> >>>Status Leds? >>> >>>uwe >> >> >> Netz is on, Feldstärke is on and rather strong. >> Modulation flashes wildly right now. This varies a lot so I will not mess >> with the antenna right now. Freilauf is on since the modulation is bad. > You will make no further progress until signal quality is good enough > for one flash every second. > > Try to switch of pieces of your equipment one at a time. > > uwe > >> >> At least ntpd sees status-changes. That did not happen with the other >> cable. > The way i understand the trace you posted you get lots zero/"0x00" bytes. > that could be either framing/parity errors or a break condition. > > Does the meinberg clock blink in the proper way if you disconnect it > form your PC? i.e. just plugged into AC and nothing else? > > >> >> /Rune > > uwe
Now the C51 is in sync Modulation seems ok and freilauf is off. The putput from ntpd is like this: pstatus: assID=12763 status=80f5 unreach, conf, 15 events, event_peer_clock, srcadr=GENERIC(0), srcport=123, dstadr=127.0.0.1, dstport=123, leap=11, stratum=0, precision=-20, rootdelay=0.000, rootdispersion=0.000, refid=DCFa, reach=000, unreach=0, hmode=3, pmode=4, hpoll=6, ppoll=7, flash=1600 peer_stratum, peer_dist, peer_unfit, keyid=0, ttl=64, offset=0.000, delay=0.000, dispersion=16000.000, jitter=0.001, reftime=00000000.00000000 Thu, Feb 7 2036 7:28:16.000, org=00000000.00000000 Thu, Feb 7 2036 7:28:16.000, rec=00000000.00000000 Thu, Feb 7 2036 7:28:16.000, xmt=c979ec84.a7e0c80b Sun, Feb 11 2007 20:27:00.655, filtdelay= 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00, filtoffset= 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00, filtdisp= 16000.0 16000.0 16000.0 16000.0 16000.0 16000.0 16000.0 16000.0 clockvars: assID=0 status=0505 clk_baddate, last_clk_baddate, device="Meinberg DCF77 C51 or compatible", timecode="\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00 \x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00", poll=12, noreply=5, badformat=0, baddata=6, fudgetime1=10.000, stratum=0, refid=DCFa, flags=0, refclock_time="<UNDEFINED>", refclock_status="", refclock_format="Meinberg Standard", refclock_states="*ILLEGAL DATE: 00:12:00 (100.00%); running time: 00:12:00" What do you mean by a "break condition" ? /Rune _______________________________________________ questions mailing list [email protected] https://lists.ntp.isc.org/mailman/listinfo/questions
