Danny Mayer wrote: > Heiko is trying to do this from Germany so it would need an additional > international dialing code, with possible pauses required for modem > synchronization. Who knows what else is going on.
>>Heiko Gerstung wrote: >> >>>Hi! >>> >>>I am currently trying to setup a box which uses the ACTS refclock driver >>>to use the PTB modem service as a time source. I thinks "B1 : US answer tone" is the culprit. uwe <from refclock_acts.c> /* * Modem setup strings. These may have to be changed for some modems. * * AT command prefix * B1 US answer tone * &C0 disable carrier detect * &D2 hang up and return to command mode on DTR transition * E0 modem command echo disabled * l1 set modem speaker volume to low level * M1 speaker enabled until carrier detect * Q0 return result codes * V1 return result codes as English words */ #define MODEM_SETUP "ATB1&C0&D2E0L1M1Q0V1\r" /* modem setup */ #define MODEM_HANGUP "ATH\r" /* modem disconnect */ _______________________________________________ questions mailing list [email protected] https://lists.ntp.isc.org/mailman/listinfo/questions
