Hi!
Despite the fact that my ACTS synchronized time server seems to be
working fine, my client does not accept it.
Any other parameters I have to change?
"ntpq -p" on server
(the GPS/PPS sources are noselect and only used for measuring the
accuracy of the ACTS source)
remote refid st t when poll reach delay offset
jitter
==============================================================================
server .INIT. 16 l - 1024 0 0.000 0.000
0.000
GENERIC(0) .GPS. 0 l 5 64 377 0.000 47.289
0.391
PPS(0) .PPS. 0 l 36 64 377 0.000 47.228
0.341
*ACTS_MODEM(1) .PTB. 0 l 127 1024 377 0.000 -4.530
4.289
"ntpq -p" on client
(the server is the second association)
remote refid st t when poll reach delay offset
jitter
==============================================================================
*gateway.py.mein .GPSi. 1 u 3 64 377 0.131 3.278
0.042
rsvd-heiko-229. .INIT. 16 u 50 1024 0 0.000 0.000
0.000
Best Regards,
Heiko
_______________________________________________
questions mailing list
[email protected]
https://lists.ntp.isc.org/mailman/listinfo/questions
