Hi, To my pc I have connected a garmin 18lvc and a HBG radio clock receiver. Now what I would like to do is: - let the hbg receiver set the current time and when the HBG signal is not available (bad reception or the 59 seconds while it is receiving the broadcastmessage) use the PPS signal of the garmin for the PPS(! not the time, only the PPS)
I read that for this I need to set: (my reference clock) # GUDE expertMouseClock HBG receiver server 127.127.8.0 mode 14 prefer fudge 127.127.8.0 refid HBG # use PPS signal from Garmin 18 LVC server 127.127.22.0 minpoll 4 maxpoll 4 fudge 127.127.22.0 flag flag2 1 Is this the correct way? How can I verify that it is using the PPS signal? Am I right that it currently does not work? Because it says noreply == poll: belle:/home/folkert# ntpq -c clockvar assID=0 status=0101 clk_noreply, last_clk_noreply, device="PPS Clock Discipline", timecode=, poll=11, noreply=11, badformat=0, baddata=0, fudgetime1=0.000, stratum=16, refid=80.80.83.0, flags=0 Folkert van Heusden -- MultiTail är en flexibel redskap för att fälja logfilar, utför av commandoer, filtrera, ge färg, sammanfoga, o.s.v. följa. http://www.vanheusden.com/multitail/ ---------------------------------------------------------------------- Phone: +31-6-41278122, PGP-key: 1F28D8AE, www.vanheusden.com _______________________________________________ questions mailing list questions@lists.ntp.org https://lists.ntp.org/mailman/listinfo/questions