On Mar 17, 9:21 pm, Unruh <unruh-s...@physics.ubc.ca> wrote: > "David J Taylor" <david-tay...@blueyonder.neither-this-bit.nor-this.co.uk> > writes: > >Dell 4400 hardware sitting in a non-temperature controlled environment - > >warm in the day, cold at night. I would happily accept five times the > >jitter for a fifth of the offset! > > Maybe when someone finally put refclock support into chrony you will have > your wish. It sounds like your temp changes causing rate changes on a scale > that ntp cannot properly cope with.
You really should glance at the 3 graphs he pointed to: http://www.satsignal.eu/software/net.htm#NTPplotter There's no need to speculate, you can see it all. > (ntp is terrible at coping with > changes-- a purposeful design decision by Mills) That's one view. I look at ntpd as terribly suspicious of change ;) The slow response is beneficial if you are relying on remote NTP servers and the surviving sources change over time with different apparent average offsets, much of the difference being driven by asymmetric delays. The chief contributor to the slower response for WAN scenarios is the minimum delay clock filter, which I wouldn't give up for the world. It's brilliant. There is a striking similarity between the minimum delay clock filter and my revamped interpolation code for Windows. The minimum delay clock filter selects the shortest roundtrip delay of the last eight, based on the observation the least-delayed exchange results in the most accurate estimate of the remote clock. The new interpolation scheme converts a counter to a timestamp by selecting from a history of recent correlated OS time & counter values the one which calculates the latest timestamp, based on the observation that all error associated with the counter having been sampled some indeterminate amount of time after the OS time advanced a tick (or 10-15ms) is negative (resulting in erroneously earlier timestamps). Cheers, Dave Hart _______________________________________________ questions mailing list questions@lists.ntp.org https://lists.ntp.org/mailman/listinfo/questions