Richard B. Gilbert <rgilber...@comcast.net> wrote: >> * On a system not locking stopping ntp and restarting having set the drift >> file to -28, results in the drift going back to -400 over a couple of >> hours - so not some odd start-up state that confuses the control loop. > > This suggests that your local clock is defective! Most properly working > hardware will generate an absolute value that is less than 100 and many > will have an absolute value less than 50.
I don't think so. This often happens with ntpd, also on systems with a well working clock. There is some sort of problem with ntpd startup as Unruh also explained. I have seen it many times. It is worse when you start to twiddle the config and shutdown/restart ntpd often. Then it can take a very long time before it becomes stable again. It seems that the official standpoint is to ignore or deny these problems, but that doesn't mean they cease to exist. _______________________________________________ questions mailing list questions@lists.ntp.org https://lists.ntp.org/mailman/listinfo/questions