Everything works after I enabled Orphan Mode with "tos orphan 5" in ntp.conf
---------- Forwarded message ---------- From: Viktar Palstsiuk <viktar.palsts...@promwad.com> Date: Mon, Oct 18, 2010 at 5:52 PM Subject: Re: [ntp:questions] TXCO derived PPS and Atom PPS Clock Discipline driver To: Göran Sandin <gsan.n...@mailnull.com> Cc: questions@lists.ntp.org I added local clock driver to ntp.conf: server 127.127.1.0 minpoll 4 maxpoll 4 prefer true server 127.127.22.0 minpoll 4 maxpoll 4 fudge 127.127.22.0 flag3 1 The result repeats: # ntpq -p remote refid st t when poll reach delay offset jitter ============================================================================== LOCAL(0) .LOCL. 5 l 11 16 377 0.000 0.000 0.008 PPS(0) .PPS. 0 l - 16 0 0.000 0.000 0.000 On Mon, Oct 18, 2010 at 5:19 PM, Göran Sandin <gsan.n...@mailnull.com> wrote: > On 2010-10-18 15:05, Viktar Palstsiuk wrote: >> >> Hello >> >> I use TXCO derived PPS. I set date and time manually. >> Is it correct to use Atom PPS Clock Discipline driver with ntp.conf like >> this: >> >> server 127.127.22.0 minpoll 4 maxpoll 4 prefer >> fudge 127.127.22.0 flag3 1 > >> But still can not get good PPS(0) status in ntpq -p >> >> >> remote refid st t when poll reach delay offset >> jitter >> >> ============================================================================== >> PPS(0) .PPS. 0 l - 16 0 0.000 0.000 >> 0.000 > > Hi Viktar, > > as far as I understand, you need another source to provide the time as well. > "prefer" keyword should be on the other source. > > Check this page > http://www.eecis.udel.edu/~mills/ntp/html/drivers/driver22.html > > /Göran > > _______________________________________________ > questions mailing list > questions@lists.ntp.org > http://lists.ntp.org/listinfo/questions > > > -- Viktar Palstsiuk -- Viktar Palstsiuk _______________________________________________ questions mailing list questions@lists.ntp.org http://lists.ntp.org/listinfo/questions