On Tue, Nov 8, 2011 at 17:52, <lelo...@free.fr> wrote: > I'm trying to configure the ntp client (w32time) of a computer that > runs XP to synchronize with a ntp server running on a linux server.
http://support.ntp.org/bin/view/Support/WindowsTimeService http://blogs.msdn.com/b/w32time/archive/2008/02/26/configuring-the-time-service-ntpserver-and-specialpollinterval.aspx http://technet.microsoft.com/en-us/library/cc779145(WS.10).aspx http://support.microsoft.com/kb/816042 http://lmgtfy.com/?q=configure+windows+time+to+use+NTP+server The Windows Time Service in Windows XP and Windows Server 2003 are essentially the same, ignoring that XP can't be a domain controller. If you want better synchronization, ntpd versions 4.2.6 and later can synchronize your Windows clock to 100 usec or better offset from a LAN source. Start by installing ntpd 4.2.4 from http://www.meinberg.de, which will get you within a handful of milliseconds, then replace the binaries with newer ones from http://davehart.net/ntp/win/x86/ Applications will still see a clock stepping every 10 or 15 msec, but that low-resolution clock will in fact be syncrhonized to a higher precision thanks to ntpd's interpolation on top of the Windows clock. I wish the story were so simple with Windows Vista and later releases of Windows, which often challenge the interpolation in ntpd by having a clock stepping every 0.5 or 1 msec with a scheduling precision of 1 msec, fouling the interpolation approach used by ntpd. There is room for improvement in ntpd, but at the cost of spinning (eating massive CPU) to detect the correlation between the system clock and the high-resolution counter (performance counter). With luck, ntpd will detect the situation and disable interpolation, synchronizing the clock within a handful of milliseconds. Cheers, Dave Hart Cheers, Dave Hart _______________________________________________ questions mailing list questions@lists.ntp.org http://lists.ntp.org/listinfo/questions