On 2013-02-12, james machado <hvgeekwt...@gmail.com> wrote: > On Tue, Feb 12, 2013 at 6:04 AM, Ralph Aichinger <ra...@pangea.at> > wrote: > >> Does this look sane to you for a Raspberry Pi with a Sure Electronics >> board and PPS enabled? It looks fine to me, I just want to confirm >> that people more experienced than me see it the same way. >> >> remote refid st t when poll reach delay offset jitter >> =========================================================================
[snip] >> oGPS_NMEA(0) .GPS. 0 l 3 16 377 0.000 -0.005 0.001 > > I would expect to see a PPS line if you have PPS up and working > correctly, The 'o' tally code at the beginning of the GPS_NMEA line is telling you that your GPS is the PPS peer. Plus the offset and jitter are appropriate for a PPS ref-clock. The tally codes are listed at http://doc.ntp.org/4.2.6p5/decode.html#peer -- Steve Kostecke <koste...@ntp.org> NTP Public Services Project - http://support.ntp.org/ _______________________________________________ questions mailing list questions@lists.ntp.org http://lists.ntp.org/listinfo/questions
