If I have palisade prefer PPS comes up fine within a minute or so. When I tried making pps prefer it got an x beside the PPS. I waited for an hour or 2 but it was still marked bad. Not sure what's going on there..
this is the relevant part of the config: # PPS server 127.127.22.0 minpoll 4 maxpoll 4 # prefer # noselect fudge 127.127.22.0 flag2 0 flag3 1 flag4 0 # time1 0.000016 # palisade on ttyS0 server 127.127.29.0 minpoll 4 maxpoll 4 prefer fudge 127.127.29.0 flag2 0 # time1 0.000015 As you can see I have tried different time1 for both clocks. I am not familiar with the mindist option. Will go check it out. I'll wait until the jitter settles down and post the offset. -----Original Message----- From: questions-bounces+marks=non-stop.com...@lists.ntp.org [mailto:questions-bounces+marks=non-stop.com...@lists.ntp.org] On Behalf Of E-Mail Sent to this address will be added to the BlackLists Sent: Friday, 16 August 2013 6:59 AM To: questions@lists.ntp.org Subject: Re: [ntp:questions] Acutime Gold Mark C. Stephens wrote: > remote refid st t when poll reach delay offset jitter > ==================================================================== > oPPS(0) .PPS. 0 l 4 16 377 0.000 -0.003 0.005 > *GPS_PALISADE(0) .GPS. 0 l 4 16 377 0.000 0.014 0.002 > > For the above wouldn't I need to advance PPS by time1 0.003? I don't think so. > And retard the palisade by time1 -0.014? > Assuming these are the average values. > > Because I tried those values and the PPS got marked bad ticker and the > palisade was unreachable! AFAIK, the way most people do it, is to have several refclocks / servers, and change to noselect, the one you want to check the serial end of line offset; let it run for a day or two, and take the average. According to the driver doc, a serial end of line time1 offset of around 20ms is common. You might also need to increase the mindist. You might also want to prefer the PPS. -- E-Mail Sent to this address <blackl...@anitech-systems.com> will be added to the BlackLists. _______________________________________________ questions mailing list questions@lists.ntp.org http://lists.ntp.org/listinfo/questions _______________________________________________ questions mailing list questions@lists.ntp.org http://lists.ntp.org/listinfo/questions
