Hi,
I see that randomly the ntp condition says reject (with configuration below). Can someone help me understand why ? I thought that if there is a "reject" it is always accompanied by a non-zero flash code ? ntpq> as ind assid status conf reach auth condition last_event cnt =========================================================== 1 55971 901a yes yes none reject sys_peer 1 2 55972 8811 yes none none reject mobilize 1 3 55973 9094 yes yes none reject reachable 9 ntpq> rv 55971 associd=55971 status=901a conf, reach, sel_reject, 1 event, sys_peer, srcadr=10.255.251.133, srcport=123, dstadr=10.255.252.190, dstport=123, leap=00, stratum=5, precision=-10, rootdelay=39.810, rootdisp=31.509, refid=10.55.6.1, reftime=d81f76f7.f88179f8 Tue, Nov 25 2014 21:45:27.970, rec=d81f78ec.c321c518 Tue, Nov 25 2014 21:53:48.762, reach=377, unreach=0, hmode=3, pmode=4, hpoll=9, ppoll=9, headway=0, flash=00 ok, keyid=0, offset=5.572, delay=47.398, dispersion=21.375, jitter=11.026, xleave=-0.118, filtdelay= 95.51 119.15 83.34 47.40 92.38 78.00 107.02 72.85, filtoffset= 2.11 -3.60 -11.89 5.57 -13.18 8.22 2.02 -3.29, filtdisp= 1.95 9.72 17.57 25.41 33.38 41.07 49.08 57.20 ntpd -n -U 180 -c /etc/ntpd.conf -A -p /tmp/ntpd.pid server 10.255.251.133 iburst prefer minpoll 4 maxpoll 9 enable calibrate tinker panic 2112912000 stepout 128 broadcast 127.1.255.255 minpoll 4 server 127.127.1.1 minpoll 4 maxpoll 5 fudge 127.127.1.1 stratum 6 interface listen all logfile /tmp/ntpd.log logconfig +allinfo +allevents +allstatistics +allstatus driftfile /tmp/ntpd.drift thanks ganesh _______________________________________________ questions mailing list questions@lists.ntp.org http://lists.ntp.org/listinfo/questions
