On Friday, February 27, 2015 at 4:45:03 PM UTC+8, Martin Burnicki wrote: > catherine.wei1...@gmail.com wrote: > > I've upgrading the ntp from 4.6.1 to 4.8.1, and need to change some > > commands which depend on ntpdc to ntpq since ntpdc has been depreciated in > > 4.8.1 version. And I met a problem. > > > > When I first set the keyid to 0, it said "Invalid key identifier", so I set > > it to 1, but it requires a MD5 Password. I don't quite understand how to > > get the keyid and password. > > > > Can you give me some advice? Appreciate your help very much. > > > > > > ~ # ntpq > > ntpq> :config addserver 192.168.1.101 minpoll 3 maxpoll 4 burst > > Keyid: 0 > > Invalid key identifier > > ntpq> :config addserver 192.168.1.101 minpoll 3 maxpoll 4 burst > > Keyid: 1 > > MD5 Password: > > ***Server disallowed request (authentication?) > > ntpq> > > > > Please see my reply to your other posting. Why do you post basically the > same question three times? > > Martin > -- > Martin Burnicki > > Meinberg Funkuhren > Bad Pyrmont > Germany
OK, thank you. Very sorry for my repeat post here, my network is not stable and quite slow, I thought I had failed to posted it so I posted again. _______________________________________________ questions mailing list questions@lists.ntp.org http://lists.ntp.org/listinfo/questions