*Hi all, * *I am trying to implement a system where NTP daemon will be a Sync source like others (GNSS/PTP/NL). * *These all sync sources (GNSS/PTP/NL) provide a CLOCK REPORT based on their accuracy. * *Which consist *
- *TimeError, * - *FrequencyError, * - *Time Uncertainty and * - *Frequency Uncertainty.* *Can i get these four parameters in ntpq -pcrl output so that i can implement NTPD as a sync source. presently i am getting the ntpq -pcrl output like below.* *# ntpq -pcrl remote refid st t when poll reach delay offset jitter============================================================================== 130.107.154.104 .STEP. 16 u - 1024 0 0.000 0.000 0.000*129.107.154.104 169.254.169.254 3 u 1 64 377 280.966 52.995 43.666associd=0 status=0618 leap_none, sync_ntp, 1 event, no_sys_peer,version="ntpd 4.2.8p5@1.3265-o Thu May 25 19:52:00 UTC 2017 (1)",processor="armv7l", system="Linux/3.10.49-perf", leap=00, stratum=4,precision=-20, rootdelay=282.690, rootdisp=80.613, refid=104.154.107.129,reftime=dcd7cb67.7569a73c Tue, May 30 2017 10:43:51.458,clock=dcd7ccc7.1f2fb0c4 Tue, May 30 2017 10:49:43.121, peer=62203, tc=6,mintc=3, offset=52.994796, frequency=6.065, sys_jitter=0.000000,clk_jitter=17.546, clk_wander=6.134Please help in finding these parameter or how can i calculate the above by using the ntpq -pcrl output.Thanks,Akash Saxena* _______________________________________________ questions mailing list questions@lists.ntp.org http://lists.ntp.org/listinfo/questions