All,
I have set up a raspberry pi as a NTP server.
The Pi is performing flawlessly.
when I run the ntp -pn, I get the following output
remote refid st t when poll reach delay offset jitter
==============================================================================
127.127.1.0 .LOCL. 10 l 27h 64 0 0.000 0.000 0.000
o127.127.20.0 .GPS. 0 l 58 64 377 0.000 0.007 0.004
*176.9.72.17 192.53.103.104 2 u 44 64 377 136.644 1.221 0.720
+46.254.216.9 89.109.251.21 2 u 58 64 337 177.067 0.041 2.734
-69.10.161.7 144.111.222.81 3 u 36 64 377 69.135 15.589 0.680
+96.244.96.19 192.168.10.254 2 u 46 64 377 58.373 0.809 13.308
Is the pi using the GPS pps signal as the reference clock or the clock at
176.9.72.17 which has
the * infront of it?
Thanks
_______________________________________________
questions mailing list
questions@lists.ntp.org
http://lists.ntp.org/listinfo/questions
