On 06/09/21 22:00, ProGeek wrote:
On Wednesday, June 9, 2021 at 6:56:04 PM UTC+3, chris wrote:
On 06/08/21 20:42, Andreas Mattheiss wrote:
Hello,
just as additional source of information: I have a similar setup here
(ublox PPS into a proper serial port of a PC) and I see a stable offset of
-3 ms to 3 servers on the net (-3 ms to any of them). I'm using ntpd
though.
Regards
Andreas
This is what I see at the ntp host here:
chris@ntp-host:~ % ntpq -pn
remote refid st t when poll reach delay offset jitter
======================================================================
o127.127.22.0 .PPS. 0 l 1 8 377 0.000 0.000 0.001
+192.9.200.168 .GPS. 1 u 10 64 377 0.193 0.001 0.054
*192.9.200.169 .GPS. 1 u 7 64 377 0.354 0.008 0.046
Using mini pc host with two network interfaces, internet and internal
network facing. FreeBSD 12 with ttl pps into the serial port dcd line
via a ttl to rs232 converter...
Chris
this is what i see on sourcestats:
210 Number of sources = 7
.- Number of sample points in measurement set.
/ .- Number of residual runs with same sign.
| / .- Length of measurement set (time).
| | / .- Est. clock freq error (ppm).
| | | / .- Est. error in freq.
| | | | / .- Est. offset.
| | | | | | On the -.
| | | | | | samples. \
| | | | | | |
Name/IP Address NP NR Span Frequency Freq Skew Offset Std Dev
==============================================================================
GPS0 12 6 176 -29.089 42.914 -8857us 1790us
SHM1 12 7 178 +0.000 0.010 -530ms 435ns
PPS0 12 7 178 +0.001 0.011 +3ns 445ns
blackmamba-g0.eff.ro 2 0 77 -0.005 2000.000 +501ms 4000ms
188.213.49.35 9 6 184 -0.748 21.608 +492ms 721us
time.cloudflare.com 6 4 81 +1.162 9.574 +500ms 72us
time.cloudflare.com 14 11 168 +0.502 0.939 +500ms 42us
if i get the results from PPS0 the offset is low, but is still reported high.
and also correspond with the external time servers.
my settings are like this:
# SHM(0), gpsd: NMEA data from shared memory provided by gpsd
refclock SHM 0 refid GPS0 poll 4 precision 1e-1 trust noselect offset 0.646
# SHM(1), gpsd: PPS0 data from shared memory provided by gpsd
refclock SHM 1 refid SHM1 poll 4 precision 1e-3 lock GPS0 trust noselect offset
0.5300
# PPS: /dev/pps0: Kernel-mode PPS ref-clock for the precise seconds
refclock PPS /dev/pps0 refid PPS0 poll 4 precision 1e-7 lock GPS0 trust prefer
delay 0.50
something is off but i can't pinpoint what
Just using a standard ntpd here, as it's more than adequate for the
task, with minimum granularity in microseconds. Does look like there
is something seriously wrong, as the gps is 8mS out, and should be
fractions of a mS if working right.
What I would try is to strip out all except the pps and gps sources
and see what the offset looks like. Also, please post the ntpd.conf
file, as that can skew everything if misconfigured. Finally, check
the polarity of the pps signal, as the ~500mS offset for several
sources, (0.5 x 1sec), suggest pps input needs an inversion, but the
ntp.conf file has a line to define that...
_______________________________________________
questions mailing list
questions@lists.ntp.org
http://lists.ntp.org/listinfo/questions
