Hi, since I had a bit of time today I decided to do some research regarding the below message. Obviously the user is not talking about qws as in quick windows sequencer but more likely the qws terminal interface available from: http://www.jollygiant.com However I discovered that qws, as in the sequencer program has an entry in the acronyms section of freedictionary.com. Thought the DevTeam might get a kick out of that, <smile>. Cheers!
-------------------------------------------------- From: "Elumalai N" <[email protected]> Sent: Tuesday, February 01, 2011 1:35 PM To: "QWS list" <[email protected]> Subject: QWS List How to Disable touch and enable mouse while linux running on the board > Hi, > > I am using i.mx51 Arm cortex A8 platform, In which Linux is running on the > target. > For User Interface i am using QT4. > It is working fine, while i am running any application like ./spreadsheet -qws > the qws is invoked with mouse and the application is running fine. > If i want to use touch i need to run the following commands > > export TSLIB_TSDEVICE="/dev/event0" > export QWS_MOUSE_PROTO="tslib:/dev/event0" > > now the mouse is not working and the touch is working. > At this situation i would like to disable the touch and enable the mouse > without restart the board. > How can do it? > Thanks in advance. > > -- > Elumalai > Firmware Engineer > Qmax Test Equipments Pvt Ltd. > #6, Elcot Avenue, > I.T Highway, > Sholinganallur, > Chennai-600 119 > Tel : +91 - 44 - 24509627 > > > Fax : +91 - 44 - 24509631 / 32 > Email : [email protected] > > To unsubscribe or change list options, see http://lists.andrelouis.com > > for archived list posts, see http://www.mail-archive.com/[email protected]
