Hi Damon, Well then if it would work, I'd be happy with a single key toggle.
All the best Steve -- Computer Room Services 77 Exeter Close Stevenage Hertfordshire SG1 4PW Tel: +44(0)1438-742286 Mob: +44(0)7956-334938 Fax: +44(0)1438-759589 Email: [email protected] Web: http://www.comproom.co.uk -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Damien C. Pendleton Sent: 25 November 2012 21:31 To: QWS list Subject: Re: QWS List Small suggestion Hi Steve, Actually, as far as programming is concerned, it's not the local message that matters. All James need do is set a boolean flag that remembers whether the local state is on or off and use that to link the toggle key with. The only slight hitch is when the program starts it would be difficult to determine the state of the local on the module at the time, though if the auto message setting is used then the flag is just set at startup and beyond. Regards, Damien. -----Original Message----- From: Steve Nutt Sent: Sunday, November 25, 2012 8:03 PM To: QWS list Subject: RE: QWS List Small suggestion Hi, I'm not sure if you can do that, because the Local off message is different to the Local on message, and QWS probably can't determine the state of local mode from the keyboard, so it would have to be a separate key for each. Midi is pretty dumb that way. All the best Steve To unsubscribe or change list options, see http://lists.andrelouis.com for archived list posts, see http://www.mail-archive.com/[email protected] To unsubscribe or change list options, see http://lists.andrelouis.com for archived list posts, see http://www.mail-archive.com/[email protected]
