First, are you trying this in the side of the screen where you're able to access the individual measures, or on the side with the word "options" read to you? Try it from the "options side if you want to quantize the entire track. If you want to do just part of the track you have to highlight the measure(s) you want to quantize. At that point you should hear the quantization. Try this: go to the options side, press Q, and then use 1 for the beat division number and hit enter. Listen to the track. This should mess up your track to the point you can hear a difference. Now hit CTRL+Z and undo it. Remember too that quantization is per beat, not measure -- there is no way to quantize to anything higher than a single beat in QWS without expanding the time and then compressing it back afterward.
-----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Mario Sent: Sunday, December 23, 2012 2:10 PM To: QWS list Subject: QWS List Quantizing with qws Hi Listers, I'am new here, and firstly I want to thank the programmer for this very good software. I've problems in quantizing with it, I tried to quantize a drum pattern that I played but it didn't get quantized to the beat. I've also tried to play with parameters, but I can't achieve the same results that I have with Sonar, for example. I've two drum tracks, one must be quantized to 8, and the charly track to 16. How I can do it? I've also read the help, but nothing... I don't have success. Thanks in advance and happy holydays! -- Iscriviti a Dropbox, il servizio per condividere i tuoi file gratis con uno spazio pari a 3500mb. Clicca: http://db.tt/W6C56gy To unsubscribe or change list options, see http://lists.andrelouis.com for archived list posts, see http://www.mail-archive.com/[email protected] To unsubscribe or change list options, see http://lists.andrelouis.com for archived list posts, see http://www.mail-archive.com/[email protected]
