Yes, thanks! That seemed to fix it. Sorry I haven't replied sooner, but I've been a busy bee.
Seth From: [email protected] [mailto:[email protected]] On Behalf Of Duncan Polak Sent: Tuesday, January 13, 2015 2:31 AM To: QWS list Subject: Re: QWS List Why isn't the loop command working propperly? Hi Seth, A had the same problem. I solved the problem by going to The "options "menu. Then in the pooldownmenu, go to options and unceck the option "confirm keep recording". Whebn The "confirm keep recording"option is checked, de looprecord option isn,t working properly. Hope this helps. ----- Original Message ----- From: SethJ <mailto:[email protected]> To: QWS list <mailto:[email protected]> Sent: Tuesday, January 13, 2015 6:11 AM Subject: QWS List Why isn't the loop command working propperly? Hey guys. So I'm trying to use the loop record command to record a lead part for my track. I set the left and right markers as shown in the tutorials. I made sure loop was on, and I went to the beginning of the loop and pressed real-time record. When I had recorded through the loop, however, It didn't go back to the beginning of the loop and played what I'd Recorded! Worse yet, It didn't even record half of what I played!!! Could someone tell me what's going on???????????????????????? Seth
