Hi, Seth,
The Rack itself operates as it should. The demos play. I connected the
output of the controller keyboard directly into the Triton and I heard
notes as I played them. I could change instrulments on the controller
and the sound changed.
I had forgotten to press "multi." I did that and nothing changed.
I checked the ports I should use and unchecked those I shouldn't use. I
can do that via the Options but the track menu still didn't see anything.
Joe G.
On 7/14/2021 4:23 PM, Seth Lowman wrote:
One thing to try: there should be a way you can test to make sure
you’re getting sound out of the Triton, such as a built-In demo
song, or something of that nature. That would be a good place to
start, as this is a module so you can’t just play a keyboard to make
sure you’re getting sound. That’ll make the Midi conundrum somewhat
easier to solve. Then, make sure your Triton is in the right mode: I
believe its called multi mode. I also found the Triton rack manuals
online:
https://www.korg.com/us/support/download/manual/1/220/1663/
<https://www.korg.com/us/support/download/manual/1/220/1663/>
The one you’ll want is the basic guide, and there is a link to it
below the license agreement. This manual also explains how to play
the demo song, as well as how to hook up the Triton to the computer
via midi.
God bless!
Seth
On Jul 14, 2021, at 12:19 PM, Joe Giovanelli <[email protected]
<mailto:[email protected]>> wrote:
Good afternoon List,
I now have the Triton rack and the USB to MIDI adapter.
The adapter has two sets of In and out MIDI jacks. This is not a Merge
box.
The keyboard connects to the computer. Another USB Nport on that
computer connects to the USB port on the Box. To this point I don't
have the Triton plugged in because I don't know which jack represents
which port.
I run QWS and I see all expected ports. I check the keyboard out. I
see In and Out ports on the box. I select an output port.
At this point I try the rack in all ports on the box. Key presses on
the controller produce no sound from the nTriton.
I go to the track menu and try to set all ports. QWS says that that
option is disabled.
I don't get that! Does all this never and?
I need your ideas! Thank you for reading this.
Joe Giovanelli, W2PVY
To unsubscribe or change list options, see http://lists.andrelouis.com
<http://lists.andrelouis.com>
for archived list posts, see
http://www.mail-archive.com/[email protected]
<http://www.mail-archive.com/[email protected]>
