It appears that the chromatic adaptation feature of `grDevices::convertColor`is
broken, and likely has been for many years. While a little surprising, it is
an obscure enough feature that there is some possibility this is actually
broken, as opposed to user error on my part. If it turns out to the latter, I
apologize in advance for spamming this list.
Consider:
rgb.in <- c("#CCCCCC", "#EEEEEE") clr <- t(col2rgb(rgb.in)) / 255 clr.out <- convertColor(clr,
"sRGB", "sRGB") rgb(clr.out) ## [1] "#CCCCCC" "#EEEEEE"
convertColor(clr, "sRGB", "sRGB", "D65", "D50") ## Error in
match.arg(from, nWhite) : ## 'arg' must be NULL or a character vector
This appears to be because `grDevices:::chromaticAdaptation` expects the whitepoints to
be provided in the character format (e.g. "D65"), but they are already
converted by `convertColor` into the tristimulus values. After applying the patch at the
end of this e-mail, we get:
clr.out <- convertColor(clr, "sRGB", "sRGB", "D65", "D50") rgb(clr.out) ## [1]
"#DACAB0" "#FEECCE"
I do not have a great way of confirming that the conversion is correct with my changes, but I did
verify that the `M` matrix computed within`grDevics:::chromaticAdaptation` for the
"D65"->"D50" conversion (approximately) matches the corresponding matrix from
brucelindbloom.com chromatic adaptation page:
http://www.brucelindbloom.com/Eqn_ChromAdapt.html
Additionally visual inspection via
scales::show_col(c(rgb.in, rgb(clr.out)))
is consistent with a shift from bluer indirect daylight ("D65") to yellower direct
daylight ("D50") illuminant.
It is worth noting that the adaption method currently in`grDevices:::chromaticAdaptation` appears
to be the "Von Kries" method, not the "Bradford" method as documented in
`?convertColor` and in the comments of thesources. I base this on comparing the cone response
domain matrices on the aforementioned brucelindbloom.com page to the `Ma` matrix defined
in`grDevics:::chromaticAdaptation`.
Given that brucelindbloom.com appears to recommend "Bradford", that the sources suggest
that was the intent, that `chromaticAdaptation` is only used by`convertColor` in the R sources,
that `chromaticAdapation` is not exported, and that that feature appears currently inaccessible via
`convertColor`, it may be worth using this opportunity to change the adaptation method to
"Bradford".
A suggested patch follows. It is intended to minimize the required changes,
although doing so requires a double transposition. The transpositions could be
easily avoided, but it would require reformulating the calculations
in`chromaticAdaption`.
Best,
Brodie.
Index: src/library/grDevices/R/convertColor.R
===================================================================
--- src/library/grDevices/R/convertColor.R (revision 75298)
+++ src/library/grDevices/R/convertColor.R (working copy)
@@ -81,7 +81,7 @@
}
chromaticAdaptation <- function(xyz, from, to) {
- ## bradford scaling algorithm
+ ## Von Kries scaling algorithm
Ma <- matrix(c( 0.40024, -0.22630, 0.,
0.70760, 1.16532, 0.,
-0.08081, 0.04570, 0.91822), nrow = 3L, byrow = TRUE)
@@ -242,8 +242,8 @@
if (is.null(from.ref.white))
from.ref.white <- to.ref.white
- from.ref.white <- c2to3(white.points[, from.ref.white])
- to.ref.white <- c2to3(white.points[, to.ref.white])
+ from.ref.white.3 <- c2to3(white.points[, from.ref.white])
+ to.ref.white.3 <- c2to3(white.points[, to.ref.white])
if (is.null(nrow(color)))
color <- matrix(color, nrow = 1L)
@@ -262,19 +262,19 @@
rgb
}
- xyz <- apply(color, 1L, from$toXYZ, from.ref.white)
+ xyz <- apply(color, 1L, from$toXYZ, from.ref.white.3)
if (is.null(nrow(xyz)))
xyz <- matrix(xyz, nrow = 1L)
- if (!isTRUE(all.equal(from.ref.white, to.ref.white))) {
+ if (!isTRUE(all.equal(from.ref.white.3, to.ref.white.3))) {
mc <- match.call()
if (is.null(mc$from.ref.white) || is.null(mc$to.ref.white))
warning("color spaces use different reference whites")
- xyz <- chromaticAdaptation(xyz, from.ref.white, to.ref.white)
+ xyz <- t(chromaticAdaptation(t(xyz), from.ref.white, to.ref.white))
}
- rval <- apply(xyz, 2L, to$fromXYZ, to.ref.white)
+ rval <- apply(xyz, 2L, to$fromXYZ, to.ref.white.3)
if (inherits(to,"RGBcolorConverter"))
rval <- trim(rval)
[[alternative HTML version deleted]]
______________________________________________
R-devel@r-project.org mailing list
https://stat.ethz.ch/mailman/listinfo/r-devel