I'm running 10, 000 iterations each for the bridge and blasso. 3, 000 iterations roughly takes a week in a core-duo processor with 16GB RAM. I'll have access to a 6C processor machine and I came across the multicore package. Can I use multicore with the bridge and blasso function? That is, is parallel processing possible for the bridge and blasso functions by using the multicore package?
Kind Regards Emily Deomano BSES Limited Q Australia -------------------- Internet e-Mail Disclaimer -------------------- PRIVILEGED - PRIVATE AND CONFIDENTIAL: This email and any files transmitted with it are intended solely for the use of the addressee(s) and may contain information, which is confidential or privileged. If you are not the intended recipient, be aware that any disclosure, copying, distribution, or use of the contents of this information is prohibited. In such case, you should destroy this message and kindly notify the sender by reply e-mail. The views and opinions expressed in this e-mail are those of the sender and do not necessarily reflect the views of the company. VIRUSES: Email transmission cannot be guaranteed to be secure or error free, as information may be intercepted, corrupted, lost, destroyed, arrive late or incomplete or contain viruses. This email and any files attached to it have been checked with virus detection software before transmission. You should nonetheless carry out your own virus check before opening any attachment. BSES Limited does not represent or warrant that files attached to this email are free from computer viruses or other defects and accepts no liability for any loss or damage that may be caused by software viruses ______________________________________________ R-help@r-project.org mailing list https://stat.ethz.ch/mailman/listinfo/r-help PLEASE do read the posting guide http://www.R-project.org/posting-guide.html and provide commented, minimal, self-contained, reproducible code.
