Hi R people.
I ran into this problem: I created a plot with errbars, like this: > errbar(x=c(1,2,3,4), y=c(2,1,3,3), yminus=c(1.5,0.5,2.5,2.5), yplus=c(2.5,1.5,3.5,3.5)) Next, I wanted to accentuate some x value with an abline, like this: > abline(v=2) In one of my R sessions (which admittedly I have had open for quite a while now), the abline draws outside of the plotting region of errbars (till the edge of my plotting window at least). I tested for the cause by opening another session (clean) of the same version of R (2.13), and running the same set of commands. In this session, I do not have this behavior. Conclusion: I must have changed some graphical parameter in my original session, but I don't know which one. Do you? As an addendum: I also want to add a few specific axis ticks besides the standard ones in my graph. I used axis for this, and it works. I set col.ticks to match the color of my abline (in the nonsimplified code), and this works too, but unfortunately, the label below the tick is not in this color, and a parameter for this is not present in axis. Suggestions for either? Note: I'm on windows 7 with R 2.13. Nick Sabbe -- ping: nick.sa...@ugent.be link: <http://biomath.ugent.be/> http://biomath.ugent.be wink: A1.056, Coupure Links 653, 9000 Gent ring: 09/264.59.36 -- Do Not Disapprove [[alternative HTML version deleted]] ______________________________________________ R-help@r-project.org mailing list https://stat.ethz.ch/mailman/listinfo/r-help PLEASE do read the posting guide http://www.R-project.org/posting-guide.html and provide commented, minimal, self-contained, reproducible code.
