*Paul, I use Tinn-r and i didn't see anything hard to configure it. You have to install the R, then the Tinn-r. After you have to open Tinn-r go to R >> Configure >> Permanent . This procedure will open the Rprofile.site file, if you want you can change some parameters and save. After that you have only to open tinn-r and inside it open the R or the Rterm (i prefer this one because consumes less memory).
Regards, Leandro *Atenciosamente, Leandro Marino http://www.leandromarino.com.br (Fotógrafo) http://est.leandromarino.com.br/Blog (EstatÃstico) Cel.: + 55 21 9845-7707 Cel.: + 55 21 8777-7907 2011/10/5 Paul Johnson <pauljoh...@gmail.com> > On Tue, Oct 4, 2011 at 1:25 PM, Charles McClure <cmccl...@atrcorp.com> > wrote: > > I am new to R and have recently tried Tinn-R with very mixed and > unexpected > > results. Can you point me to a Tinn-R tutorial on the web or a decent > > reference book? > > > > In my experience, TINN-R does not work so well, and most new users are > recommended to try instead Notepad++ with the addon components > R2notepad++ or Rstudio. I have MS Windows setup tips here > > http://web.ku.edu/~quant/cgi-bin/mw1/index.php?title=Windows:AdminTips > > Until I see evidence otherwise, I'm concluding that TINN-R was the > best in 2008, but it is harder to configure now and there's no reason > to prefer it over Notepad++. "Real Men"[tm] still use Emacs, but new > users may not have enough muscles :) > > pj > > > Thank you for your help; > > > > Charles McClure > > -- > Paul E. Johnson > Professor, Political Science > 1541 Lilac Lane, Room 504 > University of Kansas > > ______________________________________________ > R-help@r-project.org mailing list > https://stat.ethz.ch/mailman/listinfo/r-help > PLEASE do read the posting guide > http://www.R-project.org/posting-guide.html > and provide commented, minimal, self-contained, reproducible code. > [[alternative HTML version deleted]]
______________________________________________ R-help@r-project.org mailing list https://stat.ethz.ch/mailman/listinfo/r-help PLEASE do read the posting guide http://www.R-project.org/posting-guide.html and provide commented, minimal, self-contained, reproducible code.