You're good! Thanks again :)
Ben Gillespie Research Postgraduate School of Geography University of Leeds Leeds LS2 9JT Tel: +44(0)113 34 33345 Mob: +44(0)770 868 7641 http://www.geog.leeds.ac.uk/ ________________________________________ From: arun [smartpink...@yahoo.com] Sent: 25 September 2012 17:04 To: Benjamin Gillespie Cc: R help Subject: Re: [R] Script to count unique values from two linked matricies Hi Ben, No problem. The code could be collapsed to 2 steps: library(data.table) library(reshape) datm<-merge(melt(dat1),melt(dat2),by="Species") dat3<-data.frame(unlist(lapply(lapply(split(datm,datm$variable.x),function(x) data.table(x[!is.na(x$value.x),])),function(x) sum(x[,list(length(unique(value.y))),list(variable.y)]$V1)))) colnames(dat3)<-"Trait_Richness" dat3 # Trait_Richness #Site1 5 #Site2 7 #Site3 3 A.K. ----- Original Message ----- From: Benjamin Gillespie <gy...@leeds.ac.uk> To: arun <smartpink...@yahoo.com> Cc: PIKAL Petr <petr.pi...@precheza.cz>; Rui Barradas <ruipbarra...@sapo.pt>; Heramb Gadgil <heramb.gad...@gmail.com>; R help <r-help@r-project.org> Sent: Tuesday, September 25, 2012 9:34 AM Subject: RE: [R] Script to count unique values from two linked matricies Excellent - thanks so much. Ben Gillespie Research Postgraduate School of Geography University of Leeds Leeds LS2 9JT Tel: +44(0)113 34 33345 Mob: +44(0)770 868 7641 http://www.geog.leeds.ac.uk/ ________________________________________ From: arun [smartpink...@yahoo.com] Sent: 25 September 2012 14:22 To: Benjamin Gillespie Cc: PIKAL Petr; Rui Barradas; Heramb Gadgil; R help Subject: Re: [R] Script to count unique values from two linked matricies Hi Ben, Just a modification of Petr's solution with library(data.table): dat1<-data.frame(Species=paste0("Species",1:3),Site1=c(5,NA,4),Site2=c(3,2,4),Site3=c(NA,5,NA)) dat2<-data.frame(Species=paste0("Species",1:3),Trait1=1:3,Trait2=c(2,4,2),Trait3=c(5,1,1)) library(data.table) library(reshape) datm<-merge(melt(dat1),melt(dat2),by="Species") temp<-list(data.table(datm[datm[,2]=="Site1" & !is.na(datm[,3]),]),data.table(datm[datm[,2]=="Site2" & !is.na(datm[,3]),]),data.table(datm[datm[,2]=="Site3" & !is.na(datm[,3]),])) Trait_Richness<-unlist(lapply(temp, function(x) sum(x[,list(length(unique(value.y))),list(variable.y)]$V1))) dat3<-data.frame(Site=colnames(dat1)[2:4],Trait_Richness=Trait_Richness) dat3 # Site Trait_Richness #1 Site1 5 #2 Site2 7 #3 Site3 3 A.K. ----- Original Message ----- From: Benjamin Gillespie <gy...@leeds.ac.uk> To: Heramb Gadgil <heramb.gad...@gmail.com> Cc: arun <smartpink...@yahoo.com>; "r-help@r-project.org" <r-help@r-project.org> Sent: Tuesday, September 25, 2012 8:56 AM Subject: RE: [R] Script to count unique values from two linked matricies Fantastic help - thanks guys. Heramb, Pikal and Rui all came up with solutions. I prefer Rui's as it seems the simplest. I'm going to try and work through them to understand exactly what's going on at each stage. Thanks again all, Ben Gillespie Research Postgraduate School of Geography University of Leeds Leeds LS2 9JT Tel: +44(0)113 34 33345 Mob: +44(0)770 868 7641 http://www.geog.leeds.ac.uk/ ________________________________________ From: Heramb Gadgil [heramb.gad...@gmail.com] Sent: 25 September 2012 10:38 To: Benjamin Gillespie Cc: arun; r-help@r-project.org Subject: Re: [R] Script to count unique values from two linked matricies We can have something like this; Data1<-data.frame(Site1=c(5,NA,4),Site2=c(3,2,4),Site3=c(NA,5,NA)) Data2<-data.frame(TraitType1=c(1,2,3),TraitType2=c(2,4,2),TraitType3=c(5,1,1)) rownames(Data1)<-paste("Species",1:3) rownames(Data2)<-paste("Species",1:3) User_Defined=function(dat1,dat2){c1=ncol(dat1) out=NULL dummy=lapply(1:c1,function(x){step1=dat1[,x] step2=dat2[which(is.na<http://is.na>(step1)==F),] step3=length(unlist(apply(step2,2,unique))) out<<-c(out,step3) }) Final<-data.frame(TraitRichness=out) rownames(Final)<-paste('Site',1:3) Final_Table<<-Final } User_Defined(Data1,Data2) Final_Table I hope this is what you need. Best, Heramb On Tue, Sep 25, 2012 at 1:41 PM, Benjamin Gillespie <gy...@leeds.ac.uk<mailto:gy...@leeds.ac.uk>> wrote: Hi, Thanks for helping me with this one. To save you time, the following is the code for the tables I uploaded as jpegs that you may not have received: dat1<-data.frame(Species=paste("Species",1:3),Site1=c(5,NA,4),Site2=c(3,2,4),Site3=c(NA,5,NA)) dat2<-data.frame(Species=paste("Species",1:3),TraitType1=c(1,2,3),TraitType2=c(2,4,2),TraitType3=c(5,1,1)) dat3<-data.frame(Site=paste("Site",1:3),Trait_Richness=c(5,7,3)) So, I have two matricies, dat1 and dat2. Dat1 is a species abundance matrix. Dat2 is a species trait matrix. I want to create dat3 through use of a script. Dat 3 is a count of unique traits observed at each site. i.e. at site 1, species 1 and 3 are present (ass seen in dat1). Species 1 has traits: 1, 2 and 5 for trait types 1, 2 and 3 respectively. Species 3 has traits: 3, 2 and 1 for trait types 1, 2 and 3 respectively. So, at site 1: For trait type 1, 2 unique traits were observed. For trait type 2, 1 unique trait was observed (both species 1 and 3 were classed as "1") and for trait type 3, 2 unique traits (trait richness) were observed; thus, 2+1+2=5. and so on... so at site 2, all three species were observed... For trait type 1, 3 unique traits were observed (1, 2, 3), for trait type 2, 2 unique traits were observed (2, 4, 2) and for trait type 3, 2 unique traits were observed (5, 1, 1). So, for site 2, trait richness is 7 (3+2+2) traits. I hope this helps to explain, please let me know if you need any further information, Ben Gillespie Research Postgraduate School of Geography University of Leeds Leeds LS2 9JT Tel: +44(0)113 34 33345 Mob: +44(0)770 868 7641 http://www.geog.leeds.ac.uk/ ________________________________________ From: arun [smartpink...@yahoo.com<mailto:smartpink...@yahoo.com>] Sent: 24 September 2012 19:36 To: Benjamin Gillespie Subject: Re: [R] Script to count unique values from two linked matricies HI Ben, Sorry,I couldn't understand how you counted the trait richness. Could you elaborate? A.K. ----- Original Message ----- From: benrgillespie <gy...@leeds.ac.uk<mailto:gy...@leeds.ac.uk>> To: r-help@r-project.org<mailto:r-help@r-project.org> Cc: Sent: Monday, September 24, 2012 7:47 AM Subject: [R] Script to count unique values from two linked matricies I hope you can help with this one. I have two matricies: 1. A species abundance matrix: <http://r.789695.n4.nabble.com/file/n4643979/2species_matrix.jpg> 2. A species trait score matrix: <http://r.789695.n4.nabble.com/file/n4643979/2trait_matrix.jpg> The trait matrix lists trait scores for each species as listed in the species abundance matrix. I would like to create a script that would effectively count the unique traits (trait richness) for each site and produce an output like this: <http://r.789695.n4.nabble.com/file/n4643979/trait_richness.jpg> Firstly, is this possible in R? Secondly, if so, how would you go about writing a script to achieve my aim? Many thanks in advance, please let me know if you need further information. Ben Gillespie (Research Postgraduate) -- View this message in context: http://r.789695.n4.nabble.com/Script-to-count-unique-values-from-two-linked-matricies-tp4643979.html Sent from the R help mailing list archive at Nabble.com. ______________________________________________ R-help@r-project.org<mailto:R-help@r-project.org> mailing list https://stat.ethz.ch/mailman/listinfo/r-help PLEASE do read the posting guide http://www.R-project.org/posting-guide.html and provide commented, minimal, self-contained, reproducible code. ______________________________________________ R-help@r-project.org<mailto:R-help@r-project.org> mailing list https://stat.ethz.ch/mailman/listinfo/r-help PLEASE do read the posting guide http://www.R-project.org/posting-guide.html and provide commented, minimal, self-contained, reproducible code. ______________________________________________ R-help@r-project.org mailing list https://stat.ethz.ch/mailman/listinfo/r-help PLEASE do read the posting guide http://www.R-project.org/posting-guide.html and provide commented, minimal, self-contained, reproducible code.
