On Sat, 26 Apr 2008, [EMAIL PROTECTED] wrote:
> On 26-Apr-08 19:30:35, Chris Walker wrote:
>> I am using R 2.4.1 with Windows XP.
>>
>> I use the plot command in a fairly simple script and I use
>> the right mouse click on the plot and save as a postscript
>> file. I used the resultant file in a paper which was submitted
>> electronically. However, I get the following response from the
>> journal:
>>
>> Your manuscript has been unsubmitted because you failed to meet
>> the submission guidelines as indicated below:
>>
>> -Your figures must be submitted in TIFF or EPS format according
>> to the following minimum resolutions:
>>
>> 1200 dpi for black and white line art (simple bar graphs, charts,
>> etc.) 300dpi for halftones (black and white photographs) 600dpi
>> for combination halftones (Photographs that also contain line art
>> such as labeling or thin lines)
>>
>> Does anyone know how to produce the correct settings for the
>> journal (i.e.1200 dpi)?
>>
>> Thankyou
>> Chris W
>
> I'm about to swim in (for me) murky waters here, since I don't
> use R on Windows, so things may happen on that platform which
> I'm not aware of.
>
> But I just want to make general comments about PostScript and R.
>
> 1. R's postscript() device produces EPS, so that bit should
> be satisfied.
Only if there is a single page in the file. The help file says
The postscript produced for a single R plot is EPS (_Encapsulated
PostScript_) compatible, and can be included into other documents,
> 2. Normally, except when a graphic has been converted from a
> bit-mapped format, a PostScript (or EPS) file does not
> have any intrinsic resolution, so long as what it represents
> is vector graphics (which includes the rendering of letters,
> numerals, symbols, etc.). Any resolution applying to the
> result when a PS/EPS file is displayed/printed depends on
> the resolution of the "end device" (screen/printer etc.)
> which does the rendering. In principle, PS/EPS has "infinite"
> resolution (for instance, printing from EPS to photograpic film
> using a laser beam could have resolution as fine as 100,000).
Actually, there is an intrinsic resolution since coordinates in the file
are recorded to a finite accuracy. In R's case this is 0.01 bp, that is
7200 ppi (dpi is incorrect terminology for anything involving
halftones).
> 3. It is of course possible that the software generating the
> graphic implements certain things as bit-maps in the first
> place, in which case what goes in the PS/EPS file will
> inevitably do the same.
Possible in general, but not in R's postscript() device (which is what
saving from the windows() menu uses).
> You do not say what sort of graphic you have plotted, so one
> cannot tell whether (3) applies. However, my feeling is that
> either the journal has got the wrong impression of what you
> sent them, or what was intended to be an EPS file in fact
> got created/converted to some other (bit-mapped) format
> before you extracted it and sent it off.
>
> Sorry not to be more specifically helpful, but I especially
> wanted to make points (1) and (2) above, for clarification.
>
> Best wishes,
> Ted.
>
> --------------------------------------------------------------------
> E-Mail: (Ted Harding) <[EMAIL PROTECTED]>
> Fax-to-email: +44 (0)870 094 0861
> Date: 26-Apr-08 Time: 23:22:36
> ------------------------------ XFMail ------------------------------
>
> ______________________________________________
> R-help@r-project.org mailing list
> https://stat.ethz.ch/mailman/listinfo/r-help
> PLEASE do read the posting guide http://www.R-project.org/posting-guide.html
> and provide commented, minimal, self-contained, reproducible code.
>
--
Brian D. Ripley, [EMAIL PROTECTED]
Professor of Applied Statistics, http://www.stats.ox.ac.uk/~ripley/
University of Oxford, Tel: +44 1865 272861 (self)
1 South Parks Road, +44 1865 272866 (PA)
Oxford OX1 3TG, UK Fax: +44 1865 272595
______________________________________________
R-help@r-project.org mailing list
https://stat.ethz.ch/mailman/listinfo/r-help
PLEASE do read the posting guide http://www.R-project.org/posting-guide.html
and provide commented, minimal, self-contained, reproducible code.
