Got it. It should be plot1.panel.1.2.off.vp and likewise. Thanks Saptarshi On Sep 19, 2008, at 12:08 PM, Saptarshi Guha wrote:
> Hello, > I have a multi-page display each consisting of two-panels above each > other. > I need to draw a line from the top panel to bottom panel. Using > current.vpTree() > i find that "plot1.panel.1.2.vp" and "plot1.panel.1.1.vp" are the > top and bottom ones respectively. > I am using the following code(inspired by Paul Murrell's R Graphics) > to draw a line. > (All the co-ordinates lie well within the ranges of the respective > panels) > > seekViewport("plot1.panel.1.2.vp") > grid.move.to(unit(0.72,"native"),unit(3.8,"native")) > seekViewport("plot1.panel.1.1.vp") > grid.line.to(unit(1.2,"native"),unit(3.5,"native")) > > However, I can see the line in the bottom panel, but nothing in the > top. Is there some > clipping going on? > > Thanks > Saptarshi > > Saptarshi Guha | [EMAIL PROTECTED] | http://www.stat.purdue.edu/~sguha > Saptarshi Guha | [EMAIL PROTECTED] | http://www.stat.purdue.edu/~sguha After years of research, scientists recently reported that there is, indeed, arroz in Spanish Harlem. [[alternative HTML version deleted]] ______________________________________________ R-help@r-project.org mailing list https://stat.ethz.ch/mailman/listinfo/r-help PLEASE do read the posting guide http://www.R-project.org/posting-guide.html and provide commented, minimal, self-contained, reproducible code.