Thanks for posting this. I've never used Eclipse before but this document inspired me to give it a try. Unfortunately, it's a little out of date, but I think that I finally got it to work. In case anyone else would like to try this, I put a PDF of my notes online at:
http://www.gofsharp.com/R/Setting_up_Eclipse_with_R.pdf Thanks again, Dan Viar Chesapeake, VA On Fri, Mar 6, 2009 at 11:43 AM, Ledon Wong, Alain (Portfolio Analytics) <alain_ledonw...@ml.com> wrote: > Hi, > > I also use R under Eclipse/StatET. I found the following doc really > useful: > > http://www.splusbook.com/Rintro/R_Eclipse_StatET.pdf > > Regards > > Alain > 212-449-4894 > > > > -----Original Message----- > From: r-help-boun...@r-project.org [mailto:r-help-boun...@r-project.org] > On Behalf Of John Fox > Sent: Friday, March 06, 2009 10:31 AM > To: 'Michael Bibo' > Cc: r-h...@stat.math.ethz.ch > Subject: Re: [R] R editor that will work with Rcmdr > > > Dear Michael, > > For what it's worth, I develop the Rcmdr under Eclipse, and it works > fine > with Eclipse -- both under Windows and under Mac OS X. Of the IDEs that > I've > used with R, I'm most impressed with Eclipse/StatET, but configuration > is > non-trivial and documentation is sparse. > > I have a little experience with the Rcmdr under Emacs (as opposed to > XEmacs) > on Windows, and that too seems to work. > > Regards, > John > > >> -----Original Message----- >> From: r-help-boun...@r-project.org > [mailto:r-help-boun...@r-project.org] > On >> Behalf Of Michael Bibo >> Sent: March-06-09 5:20 AM >> To: r-h...@stat.math.ethz.ch >> Subject: Re: [R] R editor that will work with Rcmdr >> >> John Sorkin <jsorkin <at> grecc.umaryland.edu> writes: >> >> > >> > R 2.8.1 >> > Windows XP >> > Fedora Linux. >> > >> > I would like a suggestion for an editor that will help format my R > code >> that >> can be used with Rcmdr. Is there >> > anything I need to know about running or installing an editor when > using >> Rcmdr? I run R on both Windows and >> > Linux (Fedora). >> > Thank you, >> > John >> > >> Hi John, >> >> >From my experience, while (X)Emacs + ESS or JGR work with Rcmdr under > Linux, >> there can be problems using either of these in conjunction with Rcmdr > under >> Windows. From John Fox's own 'An Introduction to ESS + XEmacs for > Windows >> Users of R': "The Rcmdr package does not run reliably under XEmacs/ESS > for >> Windows." On Windows XP at least, this still seems to be the case - > for > me >> it >> always ends up crashing R. >> Under Windows, Tinn-R and Notepad++ with NppToR >> (http://sourceforge.net/projects/npptor/) work fine alongside Rcmdr, > but > both >> of >> them are Windows only. Other IDEs such as Eclipse I haven't tested. >> >> Hope this is helpful, >> >> Michael Bibo >> Queensland Health >> >> ______________________________________________ >> R-help@r-project.org mailing list >> https://stat.ethz.ch/mailman/listinfo/r-help >> PLEASE do read the posting guide > http://www.R-project.org/posting-guide.html >> and provide commented, minimal, self-contained, reproducible code. > > ______________________________________________ > R-help@r-project.org mailing list > https://stat.ethz.ch/mailman/listinfo/r-help > PLEASE do read the posting guide > http://www.R-project.org/posting-guide.html > and provide commented, minimal, self-contained, reproducible code. > > -------------------------------------------------------------------------- > This message w/attachments (message) may be privileged, confidential or > proprietary, and if you are not an intended recipient, please notify the > sender, do not use or share it and delete it. Unless specifically indicated, > this message is not an offer to sell or a solicitation of any investment > products or other financial product or service, an official confirmation of > any transaction, or an official statement of Merrill Lynch. Subject to > applicable law, Merrill Lynch may monitor, review and retain e-communications > (EC) traveling through its networks/systems. The laws of the country of each > sender/recipient may impact the handling of EC, and EC may be archived, > supervised and produced in countries other than the country in which you are > located. This message cannot be guaranteed to be secure or error-free. > References to "Merrill Lynch" are references to any company in the Merrill > Lynch & Co., Inc. group of companies, which are wholly-owned by Bank of > America Corporation. Secu! > rities and Insurance Products: * Are Not FDIC Insured * Are Not Bank > Guaranteed * May Lose Value * Are Not a Bank Deposit * Are Not a Condition to > Any Banking Service or Activity * Are Not Insured by Any Federal Government > Agency. Attachments that are part of this E-communication may have additional > important disclosures and disclaimers, which you should read. This message is > subject to terms available at the following link: > http://www.ml.com/e-communications_terms/. By messaging with Merrill Lynch > you consent to the foregoing. > -------------------------------------------------------------------------- > > ______________________________________________ > R-help@r-project.org mailing list > https://stat.ethz.ch/mailman/listinfo/r-help > PLEASE do read the posting guide http://www.R-project.org/posting-guide.html > and provide commented, minimal, self-contained, reproducible code. > ______________________________________________ R-help@r-project.org mailing list https://stat.ethz.ch/mailman/listinfo/r-help PLEASE do read the posting guide http://www.R-project.org/posting-guide.html and provide commented, minimal, self-contained, reproducible code.