Hi, Simon et al.
[changing to "R-package-devel, because I've heard complaints that this
may not be appropriate for R-devel.]
I'm still having problems. I found that I had Java twice in the
path and deleted both versions (~\AdoptOpenJDK\jdk-11.0.6.10-hotspot\bin
and ~Java\jre1.8.0_241). That seemed not to change anything as far as I
can tell.
I have both directories for both "~Rtools" and "~rtools40", and
the path includes "~rtools40\bin". When running R4.0.0 within RStudio,
"install.package('rJava', type='source', INSTALL_opts =
'--merge-multiarch') complained, "WARNING: Rtools is required ... but
no version compatible ... was found. Note that the following
incompatible versions(s) ... were found: - Rtools 3.5". When I run r
in a CMD prompt, I don't get that warning. However, both complain,
warning in system("sh ./configure.win") : 'sh' not found
When I tried "install.packages('rJava')", it seemed to work OK
(though I still got the complaint from R within RStudio that it could
not find rtools40).
And my primary problem is unchanged: "R CMD check
Ecfun_0.2-4.tar.gz" ends with the following:
Error: package or namespace load failed for 'Ecfun':
.onLoad failed in loadNamespace() for 'rJava', details
call: inDL(x, as.logical(local), as.logical(now), ...)
error: unable to load shared object 'c:/Program
Files/R/R-4.0.0/library/rJava/libs/i386/rJava.dll':
LoadLibrary failure: ^1 is not a valid win32 application
The same package on my Mac quits with a LaTeX error I have yet to
figure out how to fix.
Suggestions?
Thanks,
Spencer Graves
00install.out:
* installing *source* package 'Ecfun' ...
** using staged installation
** R
** inst
** byte-compile and prepare package for lazy loading
** help
*** installing help indices
** building package indices
** installing vignettes
** testing if installed package can be loaded from temporary location
*** arch - i386
Error: package or namespace load failed for 'Ecfun':
.onLoad failed in loadNamespace() for 'rJava', details:
call: inDL(x, as.logical(local), as.logical(now), ...)
error: unable to load shared object 'C:/Program
Files/R/R-4.0.0/library/rJava/libs/i386/rJava.dll':
LoadLibrary failure: %1 is not a valid Win32 application.
Error: loading failed
Execution halted
*** arch - x64
ERROR: loading failed for 'i386'
* removing 'C:/Users/spenc/Documents/R/Ecfun/Ecfun.Rcheck/Ecfun'
On 2020-05-02 02:20, Simon Urbanek wrote:
Spencer,
you shouldn't have anything on the PATH, the location of Java is taken from the
registry so you only need t have a valid installation of Java. Better don't set
PATH or JAVA_HOME as it will stop rJava from working if you get it wrong. The
errors on Windows are confusing, the actual error is shown via GUI as pop-up,
what they report in the console is not the real error.
Re installation from source - it sooks like you either don't have Rtools40 or
you didn't set PATH properly. If I recall the new Rtools40 no longer set the
PATH (for whatever reason) so you have to do it by hand and the instructions it
gives you are not working for the command shell.
Cheers,
Simon
On 1/05/2020, at 4:51 PM, Spencer Graves <spencer.gra...@prodsyse.com> wrote:
Hi, Jeroen et al.:
On 2020-04-30 03:15, Jeroen Ooms wrote:
On Thu, Apr 30, 2020 at 6:38 AM Spencer Graves
<spencer.gra...@prodsyse.com> wrote:
Hello, All:
"00install.out" from "R CMD check Ecfun_0.2-4.tar.gz" includes:
Error: package or namespace load failed for 'Ecfun':
.onLoad failed in loadNamespace() for 'rJava', details
call: inDL(x, as.logical(local), as.logical(now), ...)
error: unable to load shared object 'c:/Program
Files/R/R-4.0.0/library/rJava/libs/i386/rJava.dll':
LoadLibrary failure: ^1 is not a valid win32 application
This is an error in loading the rJava package, so it is not related to
rtools40, and probably inappropriate for this mailing list.
As Simon suggested, you may have to install the 32-bit Java JDK. See
also this faq:
https://github.com/r-windows/docs/blob/master/faq.md#how-to-install-rjava-on-windows
In fact I had both 32- and 64-bit Java installed but only the 64-bit was in the
path. I added the 32-bit, but that did not fix the problem. The last 2.5 lines in the
section "How to install rJava on Windows?" to which you referred me reads:
to build rJava from source, you need the --merge-multiarch flag:
install.packages('rJava', type = 'source', INSTALL_opts='--merge-multiarch')
When I tried that, I got:
Warning in system("sh ./configure.win") : 'sh' not found
*** ON THE OTHER HAND: The error message above says 'c:/Program
Files/R/R-4.0.0/library/rJava/libs/i386/rJava.dll':
LoadLibrary failure: ^1 is not a valid win32 application
Is "rJava.dll" a valid win32 application?
Suggestions?
Thanks,
Spencer Graves
p.s. A similar problem with rJava a month ago was fixed by installed 64-bit
Java. Now with the upgrade to R 4.0.0 and rtools40, this no longer works.
______________________________________________
r-de...@r-project.org mailing list
https://stat.ethz.ch/mailman/listinfo/r-devel
______________________________________________
R-package-devel@r-project.org mailing list
https://stat.ethz.ch/mailman/listinfo/r-package-devel
