I saw this today when moving my 5399's to Radiator. For some
reason, after i changed my pref_secure1_host, i needed to issue an 'reset
annex security' not one but several times on some of the servers.
- jeremy
On Thu, 20 May 1999, Clement wrote:
> Hi Guys,
>
> I am receiving no accounting records from my Bays after reset. A look
> at the log files shows that the Bays are waiting a proper reply from
> "Acct-Status-Type = Accounting-On" accounting requests. However, the
> radiator is not giving the correct response. Do you know how can I
> program RADIATOR to give the proper response again?
>
> Your help is much appreciated.
>
> - This is a response that does not work
>
>
> Code: Accounting-Request
> Identifier: 152
> Authentic:
> <151>N<128><212><138><219>T<152><209><228>i<162><200><142><20>I
> Attributes:
> Acct-Status-Type = Accounting-On
> Acct-Session-Id = "4000000"
> Acct-Delay-Time = 42028
> NAS-IP-Address = 203.132.1.242
> Annex-Product-Name = "5399/Turbo"
> Annex-SW-Version = "X15.1.6"
>
> Thu May 20 00:08:38 1999: DEBUG: Check if Handler Acct-Status-Type=Stop
> should be used to handle this request
> Thu May 20 00:08:38 1999: DEBUG: Check if Handler should be used to
> handle this request
> Thu May 20 00:08:38 1999: DEBUG: Handling request with Handler ''
> Thu May 20 00:08:38 1999: DEBUG: Handling with Radius::AuthSQL
> Thu May 20 00:08:38 1999: DEBUG: Handling accounting with
> Radius::AuthSQL
> Thu May 20 00:08:38 1999: DEBUG: Deleting all sessions for 203.132.1.242
> Thu May 20 00:08:38 1999: DEBUG: got On/Off from 203.132.1.242
> Thu May 20 00:08:38 1999: DEBUG: Accounting accepted
> Thu May 20 00:08:38 1999: DEBUG: Packet dump:
> *** Sending to 203.132.1.242 port 1040 ....
> Code: Accounting-Response
> Identifier: 152
> Authentic:
> <151>N<128><212><138><219>T<152><209><228>i<162><200><142><20>I
> Attributes:
>
>
> - This is a response that worked
>
> Code: Accounting-Request
> Identifier: 0
> Authentic: mwOte@<158>Q<165><23>-<218><10><195><193><237>
> Attributes:
> Acct-Status-Type = Accounting-On
> Acct-Session-Id = "5e060000"
> Acct-Delay-Time = 1
> NAS-IP-Address = 203.132.1.244
> Annex-Product-Name = "8000RAC/Turbo"
> Annex-SW-Version = "X15.1.6"
>
> Mon May 17 22:17:55 1999: DEBUG: Check if Handler Acct-Status-Type=Stop
> should be used to handle this request
> Mon May 17 22:17:55 1999: DEBUG: Check if Handler should be used to
> handle this request
> Mon May 17 22:17:55 1999: DEBUG: Handling request with Handler ''
> Mon May 17 22:17:55 1999: DEBUG: Handling with Radius::AuthSQL
> Mon May 17 22:17:56 1999: DEBUG: Handling accounting with
> Radius::AuthSQL
> Mon May 17 22:17:56 1999: DEBUG: Deleting all sessions for 203.132.1.244
> Mon May 17 22:17:56 1999: DEBUG: got On/Off from 203.132.1.244
> Mon May 17 22:17:56 1999: DEBUG: Accounting accepted
> Mon May 17 22:17:56 1999: DEBUG: Packet dump:
> *** Sending to 203.132.1.244 port 1040 ....
> Code: Accounting-Response
> Identifier: 0
> Authentic: mwOte@<158>Q<165><23>-<218><10><195><193><237>
> Attributes:
>
> Regards
> Clement
>
> ===
> Archive at http://www.thesite.com.au/~radiator/
> To unsubscribe, email '[EMAIL PROTECTED]' with
> 'unsubscribe radiator' in the body of the message.
>
-------------------------------------------------------------
Jeremy Hinton [EMAIL PROTECTED]
NOC - VisiNet http://www.visi.net/~jgh
In this world, you must be oh-so smart, or oh-so pleasant.
For years I was smart. I recommend pleasant. - Elwood P Dowd
===
Archive at http://www.thesite.com.au/~radiator/
To unsubscribe, email '[EMAIL PROTECTED]' with
'unsubscribe radiator' in the body of the message.
